ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL

Douglas Fir Timber Beam: a Straight Log Hewn Square and Seasoned
Douglas fir is strong, hard and durable, the wood of timber frames, trusses and heavy timber structures, and it comes in long lengths. Snap chalk lines on a straight log, hew it square with axe and adze, seal the ends and let it season under cover.
The picture: our diagram, the square marked on the log end and the hewn beam.
Intermediário
Two days, then seasoning
Instruções
1
1
Cut and mark
Cut and mark
Crosscut the straight log to length. Draw the square on both ends and snap chalk lines along the log between the corners.
Materiais para este passo:
Tronco de pinheiro-de-oregon (Pseudotsuga menziesii)1 peçaFerramentas necessárias:
Serra traçadeira
Fita métrica
Esquadro fixo
Cordão de marcar
Luvas de trabalho em couro2
2
Hew
Hew
Score down to the line every hand's breadth with the axe, knock off the chunks, then hew the face flat to the line with the adze. Turn the log and repeat on each face.
Ferramentas necessárias:
Machado
Enxó
Cordão de marcar
Luvas de trabalho em couro3
3
Season
Season
Seal the ends and stack the beam on stickers off the ground under cover until it has dried.
Ferramentas necessárias:
Vedante de topo (parafina)
Sarrafo de madeira (espaçador de secagem)
Lona4
4
Largest square from your log
Largest square from your log
A carregar o notebook Jupyter…
Materiais
1- Referência
Ferramentas necessárias
10- Referência
- 1 vendor sell this, none ship to you yetReferência
- Referência
- Referência
- Referência
- Referência
- Referência
- Referência
- Referência
Este projeto faz
Blueprints relacionados
Estes blueprints compartilham conhecimento — técnicas, materiais ou princípios
CC0 Domínio Público
Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.
Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.


