Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL

Dust Mask: Rigid Perforated Guard with a Replaceable Cloth Filter (Swindell, US 2,681,060, 1954)
A simple dust mask for workshops and plants. A rigid cup with air holes covers the nose and mouth. A cloth filter lines the inside and folds over the cup's rim, held by wire clips: the air passes through the cloth, and the cloth also pads the rim against the face. Change the cloth and the same mask can pass from worker to worker.
Result: a nose-and-mouth dust mask with a filter you can replace.
Source: M. E. Swindell, US 2,681,060 (1954). Unknown: sizes, how the cup is formed, the cloth. Picture: the patent drawing.
Iniciante
Unknown
Instruções
1
1
Make the guard
Make the guard
Make a rigid cup to cover the nose and mouth, of composition rubber, plastic, metal or another suitable material. Give it a narrow upright bulge at the front for the nose. Shape its edge to the face so it fits close at the bridge of the nose and the chin, and turn the whole edge outward as a curved lip. Make air holes in both the nose bulge and the mouth part. Not given: sizes, the number of holes, how it is formed.
Materiais para este passo:
Material desconhecido1 guardFerramentas necessárias:
Berbequim de mão
Dimensões desconhecidas2
2
Fit the filter clips
Fit the filter clips
Bend several clips of springy wire and rivet them to the guard near its edge, so each can press down on the back of the lip. Ours: spring steel wire. Not given: how many clips.
Materiais para este passo:
Fio de aço para molas1 clips
Metal desconhecido1 rivetsFerramentas necessárias:
Alicate de bicos redondos
Jogo de rebitar3
3
Make the head strap
Make the head strap
Cut an elastic strap to go round the head and fit a hook at each end. The hooks catch in a pair of the guard's air holes. Not given: the length, the hook metal.
Materiais para este passo:
Cordão elástico1 strap
Metal desconhecido1 two hooksFerramentas necessárias:
Tesoura
Alicate de bicos redondos4
4
Fit the filter and wear it
Fit the filter and wear it
Lay a cup-shaped cloth filter in the hollow of the guard. Fold its edges over the lip and clamp them to the back of the lip with the clips. The cloth leaves an air space in front of the face and one between itself and the guard, and it pads the lip where it touches the face. Hook the strap into the holes and put the mask over the nose and mouth. Replace the cloth when it is used, or before the mask passes to another wearer. Not given: the cloth.
Materiais para este passo:
Tecido desconhecido1 filterFerramentas necessárias:
TesouraMateriais
5- 1 guardReferência
- 1 clipsReferência
- 1 two hooksReferência
- 1 strapReferência
- 1 filterReferência
Ferramentas necessárias
5- Referência
- Referência
- Referência
- Referência
- Referência
Materiais de Blueprints conectados
Este projeto faz
Blueprints relacionados
Estes blueprints compartilham conhecimento — técnicas, materiais ou princípios
CC0 Domínio Público
Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.
Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.




