Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL

Forge-Welded Plough and Trace Chain: Links Bent, Scarfed and Welded One into the Next, with S-Hooks and a Swivel (Edwinson, 1886)
How a country smith made and mended farm chain, from George Edwinson's series in Amateur Work (1886): rod cut to link length plus one-third, bent hot, scarfed and forge-welded shut through the previous link; tough S-hooks for field repairs and a forged swivel link with its pin.
Intermediário
A few minutes per link
Instruções
1
1
His rules
His rules
A carregar o notebook Jupyter…
2
2
Read Edwinson
Read Edwinson
"Measure the length of a link in the chain, add one-third to this, and the total will give the required length of iron for an oval link."
3
3
Cut the stock
Cut the stock
For an oval link cut rod the link length plus one-third; for a round link a little over three times its diameter. Nick the lengths off the rod (his fig. 163).
Materiais para este passo:
Vergalhão de ferro forjado1 peçaFerramentas necessárias:
Talhadeira a quente
Bigorna
Martelo4
4
Bend and scarf
Bend and scarf
Heat the middle of a piece red, bend it into a U (fig. 164), and scarf both ends (fig. 165).
Ferramentas necessárias:
Forja de ferreiro
Bigorna
Martelo
Tenazes de ferreiro5
5
Weld the links
Weld the links
Thread the open link through the last finished link, bring it to a welding heat, close it up and weld it shut. Repeat link by link.
Materiais para este passo:
Areia1 peçaFerramentas necessárias:
Forja de ferreiro
Bigorna
Martelo
Tenazes de ferreiro6
6
S-hooks for repairs
S-hooks for repairs
Bend S-hooks (fig. 166) from tough iron and cool them slowly. A broken chain is mended in the field by bending the hook ends over the broken links (fig. 167).
Materiais para este passo:
Vergalhão de ferro forjado1 peçaFerramentas necessárias:
Forja de ferreiro
Bigorna
Martelo7
7
Swivel link
Swivel link
Cut iron as for a round link, double it (fig. 168), form it over the beck of the anvil (169), weld the ends together and draw them out (170), then form, bend over and scarf (171). Forge the swivel pin (172), set it in the swivel's boss, weld up the eye and finish (173).
Materiais para este passo:
Vergalhão de ferro forjado1 peçaFerramentas necessárias:
Forja de ferreiro
Bigorna
Martelo
Tenazes de ferreiro8
8
Troubleshooting
Troubleshooting
Chain troubleshooting.
Flow
Loading...
9
9
History and honest limits
History and honest limits
From George Edwinson, "Smithing and Forging" VIII, **Amateur Work, Illustrated**, vol. VI (1886-87), p. 83 and figs. 162-175 on p. 80 (checked on the archive.org scan amateurworkillus06lond). He gives no rod size for plough chain; the notebook link sizes, metric figures and tools are ours.
Este projeto faz
Blueprints relacionados
Estes blueprints compartilham conhecimento — técnicas, materiais ou princípios
CC0 Domínio Público
Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.
Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.


