Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Steel-Laid Axe and Hatchet: Iron Folded Round a Mandrel, Shear Steel Welded Between the Leaves (Edwinson, 1886)
Forge

Criado por

Forge

14. novembro 2026NO
7
0
0
0
0

Steel-Laid Axe and Hatchet: Iron Folded Round a Mandrel, Shear Steel Welded Between the Leaves (Edwinson, 1886)

How axes and hatchets were made of iron and shear steel, from George Edwinson's smithing series (Amateur Work, 1886): a flat iron bar folded round a tapering mandrel to make the eye, the leaves welded, and a thin slice of steel welded between them so the ground edge is always steel.
Avançado
A day at the forge

Instruções

1

Read Edwinson

"By this means a layer of steel is enclosed between two layers of iron, and a steel edge is always ensured to the tool."
2

Fold the eye

Take flat iron of the width and thickness you want, twice the length of the blade. Heat it and bend it over a tapering mandrel the same section as the handle (his fig. 225).

Materiais para este passo:

Barra de ferro forjadoBarra de ferro forjado1 peça

Ferramentas necessárias:

Forja de ferreiroForja de ferreiro
BigornaBigorna
MarretaMarreta
Tenazes de ferreiroTenazes de ferreiro
Mandril de alargar furoMandril de alargar furo
3

Close and shape the eye

Weld the two leaves together where they meet near the eye. Reheat and forge the eye to shape on the mandrel, then drive the mandrel in the other way to open the inner edge of the eye slightly.

Materiais para este passo:

Bórax em póBórax em pó1 peça

Ferramentas necessárias:

Forja de ferreiroForja de ferreiro
BigornaBigorna
MarteloMartelo
Mandril de alargar furoMandril de alargar furo
4

Lay in the steel

Put a thin slice of shear steel, as wide as the axe, between the two leaves. Bring both to a welding heat and forge them down together to the thickness and width wanted.

Materiais para este passo:

Placa de aço caldeado (shear steel)Placa de aço caldeado (shear steel)1 peça
Bórax em póBórax em pó1 peça

Ferramentas necessárias:

Forja de ferreiroForja de ferreiro
BigornaBigorna
MarretaMarreta
Tenazes de ferreiroTenazes de ferreiro
5

Hatchet hammer (variant)

For a carpenter's hatchet (fig. 223) weld a rectangular piece of steel to the back of the eye and forge it down with it as the hammer. The miner's hatchet (fig. 224) has a massive ear, a bar-steel hammer and a slit in the blade for drawing nails. Do not make a woodman's axe square-headed: men drive wedges with the back and spoil it.

Materiais para este passo:

Aço de cadinhoAço de cadinho1 peça

Ferramentas necessárias:

Forja de ferreiroForja de ferreiro
BigornaBigorna
MarteloMartelo
Talhadeira a quenteTalhadeira a quente
6

Pare and smooth

Pare the rough forging to shape with hot chisels (his setts) while hot. Hammer the sides well at a low red heat until smooth.

Ferramentas necessárias:

Forja de ferreiroForja de ferreiro
Talhadeira a quenteTalhadeira a quente
BigornaBigorna
MarteloMartelo
7

Harden, temper and grind

Harden and temper the blade, then grind it on a grindstone to sharpen the edge and polish the blade.

Ferramentas necessárias:

Forja de ferreiroForja de ferreiro
Balde de têmperaBalde de têmpera
Mó de afiarMó de afiar
8

Hang the head (ours)

He does not cover the handle. Ours: fit a hickory handle blank to the eye and wedge it.

Materiais para este passo:

Bloco em bruto para cabo de machado (nogueira-americana)Bloco em bruto para cabo de machado (nogueira-americana)1 peça
Cunhas de madeiraCunhas de madeira1 peça

Ferramentas necessárias:

Faca de dois cabosFaca de dois cabos
MarteloMartelo
9

Troubleshooting

Axe troubleshooting.

Flow

Loading...
10

History and honest limits

From George Edwinson, "Smithing and Forging" (part X), **Amateur Work, Illustrated**, vol. VI (Ward, Lock & Co., 1886-87), pp. 211-214 (checked on the archive.org scan amateurworkillus06lond), p. 212 and figs. 222-225. He gives no temper colour for axes, no sizes and no handle: those are ours.

Materiais

6

Ferramentas necessárias

10

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...