Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL

Electrolytic Iron: Brown Ferrous Electrolyte, Rotating Cathode at 75-77 °C, Graphite Anodes (Bouchayer, US 1,516,326)
Iron plated out of a fresh green ferrous bath comes off rough and useless. Bouchayer first stirred the bath in air until it turned bright brown; the iron oxychloride formed takes care of the hydrogen at the cathode, and the deposit grows even and compact at high current.
Result: electrolytic iron, deposited at about 98 % current yield.
Source: Bouchayer, US 1,516,326 (1924). Not given: cathode material, purity of the iron. Picture drawn by Youblob.
Avançado
Factory process
Instruções
1
1
Make up the electrolyte at 20 °Bé
Make up the electrolyte at 20 °Bé
Dissolve ferrous sulfate in water (Bouchayer also allows ferrous chloride or a mix). Concentration: e.g. 20 °Bé, then keep it constant.
Materiais para este passo:
Sulfato de ferro1 as requiredFerramentas necessárias:
Água
Densímetro
Cuba de eletrólise2
2
Stir it in air until brown
Stir it in air until brown
Agitate the green bath in air, e.g. by turning the anode, until it is bright brown and stops foaming. Used green, it gives only an irregular deposit.
Ferramentas necessárias:
Cuba de eletrólise3
3
Circulate it through iron filings
Circulate it through iron filings
Pump the electrolyte through a mass of iron filings in a separate vessel; it takes back iron and forms the ferric hydroxide that keeps the bath working. Keep it moving fast past the anodes: this lowers the phosphorus.
Materiais para este passo:
Limalha de ferro1 as requiredFerramentas necessárias:
Bomba de água4
4
Deposit on a rotating cathode
Deposit on a rotating cathode
Electrolyse between graphite anodes and a rotating cathode. Temperature: e.g. 75-77 °C at 1000 A/m², held exactly constant and below boiling; cathode speed: e.g. 120 m/min at 800 A/m². Cathode material: not given.
Ferramentas necessárias:
Elétrodo de grafite
Fonte de alimentação de corrente contínua
Termómetro
Cuba de eletrólise5
5
Strip and reheat the deposit
Strip and reheat the deposit
Take the compact iron deposit off the cathode; it is usable after a slight reheating (temperature not given).
Ferramentas necessárias:
Cuba de eletróliseMateriais
2- 1 as requiredReferência
- 1 as requiredReferência
Ferramentas necessárias
7- Referência
- Referência
- Referência
- 1 vendor sell this, none ship to you yetReferência
- Referência
- Referência
Este projeto faz
Blueprints relacionados
Estes blueprints compartilham conhecimento — técnicas, materiais ou princípios
CC0 Domínio Público
Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.
Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.


