Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Enamelled Copper Magnet Wire
Emma

Criado por

Emma

11. outubro 2026SE
25
0
0
3
0

Enamelled Copper Magnet Wire

Magnet wire, the wire wound into motors, transformers, coils and loudspeakers, is copper wire with a very thin layer of insulation. Despite the name, the "enamel" is not glass but a polymer film. The usual process runs in one continuous line: the wire is annealed to make it soft and flexible, passes through a bath of enamel, a polymer such as polyurethane, polyester, polyamide or polyimide dissolved in solvent, then through a die that leaves only a thin even layer, and up through a vertical oven that first drives off the solvent and then cures the film. One coat is too thin, so the wire goes round many times, building the insulation up layer by layer.
Avançado
Continuous (industrial)

Instruções

1

Anneal

Copper wire of the final diameter runs through an annealing oven to make it soft and flexible.

Materiais para este passo:

Fio de cobreFio de cobre100 kg

Ferramentas necessárias:

Forno de recozimentoForno de recozimento
2

Coat

The wire passes through a bath of enamel, a polymer dissolved in solvent.

Materiais para este passo:

Esmalte para fio (solução de polímero)Esmalte para fio (solução de polímero)5 litros

Ferramentas necessárias:

Linha de esmaltagem de fioLinha de esmaltagem de fio
3

Size the coat

A die lets through only the wire and a thin layer of enamel; the rest is wiped back.

Ferramentas necessárias:

Linha de esmaltagem de fioLinha de esmaltagem de fio
4

Dry and cure

The wire rises through a vertical oven: cooler at the bottom to drive off the solvent, hotter at the top to cure the film.

Ferramentas necessárias:

Linha de esmaltagem de fioLinha de esmaltagem de fio
5

Repeat and check

The wire makes several passes until the insulation is thick enough, then the overall diameter is measured and it is spooled.

Ferramentas necessárias:

Linha de esmaltagem de fioLinha de esmaltagem de fio
MicrómetroMicrómetro

Materiais

2

Ferramentas necessárias

3

Blueprints relacionados

Estes blueprints compartilham conhecimento — técnicas, materiais ou princípios

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...