Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Coppice Wood for Poles, Billets and Faggots (Evelyn's Sylva, 1706)
Karen

Criado por

Karen

14. novembro 2026SE
5
0
0
0
0

Coppice Wood for Poles, Billets and Faggots (Evelyn's Sylva, 1706)

John Evelyn's coppice husbandry: hazel, ash, chestnut and willow planted close and cut back to the stool every 8 to 20 years, so each fell gives poles, statute billets and faggots, while the best saplings are left to grow on as timber.
Intermediário
Rotations of 8 to 20 years; a winter per fell

Instruções

1

Rotation and measures

A carregar o notebook Jupyter…
2

Read Sylva

"Sylva caedua is (as Varro defines it) as well copp'ce to cut for fuel as for use of timber."
3

Lay out and plant

Lay the coppice out in parts that are cut in turn, with 18-20 ft rides of grass between them for carts, and fence it. Plant hazel or birch with ash, chestnut, sallow and sycamore mixed in (at least one in four), no closer than 5 ft; on wet ground drain it and put willow, sallow and alder low down. Or bury sets of sallow, willow or alder, a billet long with both ends sloped. Weed for two years and keep cattle out.

Materiais para este passo:

Vara de madeira duraVara de madeira dura1 peça

Ferramentas necessárias:

Pá de cavarPá de cavar
EnxadaEnxada
4

Choose the rotation

Cut after 8 or 9 years on very good ground, otherwise 12 to 15; 20 years is better. With a 17-year growth, a 17-acre coppice gives one acre to fell every year for ever. Shallow ground 10-12 years, deeper 14.
5

Fell the underwood

Fell from January to mid-March or April, or mid-September to near the end of November, starting from one side so carts can enter. Cut no higher than half a foot, the closer the better, slanting, smooth and sloping to the south. Of a bunch of shoots keep the fairest sapling. Leave about twelve good young oaks (or ash, elm, beech) per acre as standards, best on the edges. Keep enough poles round the bounds for the fence.

Ferramentas necessárias:

MachadoMachado
PodãoPodão
6

Make up the wood

Sort out the straight poles. Cut billets 3 ft long and 7.5 in round, and bind the brush into round faggots a full yard long and 2 ft round. Stack cordwood 4 ft high, 4 ft broad and 8 ft long (128 cubic feet). Clear everything by Midsummer.

Materiais para este passo:

Fio de jutaFio de juta1 peça

Ferramentas necessárias:

MachadoMachado
PodãoPodão
SerroteSerrote
7

Close it up

Rake out spray and chips, grub out rotten stubs, fill thin places with new plants, and shut the coppice to cattle: four years if it was cut at 14 years or under, longer if older.

Materiais para este passo:

Vara de madeira duraVara de madeira dura1 peça

Ferramentas necessárias:

Ancinho de ferroAncinho de ferro
Pá de cavarPá de cavar
8

Troubleshooting

Coppice troubleshooting.

Flow

Loading...
9

History and honest limits

From John Evelyn, **Sylva** (text of the 1706 edition, London reprint 1908), Book III, Chap. I 'Of Copp'ces' (checked on the archive.org scan sylvaordiscourse02evelrich, pp. 1-7). The statutes he cites are 17th-century English law, given as history; metric figures are ours.

Materiais

2

Ferramentas necessárias

6

Blueprints relacionados

Estes blueprints compartilham conhecimento — técnicas, materiais ou princípios

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...