Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Ferrovanadium: Gin's Ferro-Silicon Reduction of Vanadium Trioxide (Stansfield, 1914)
Forge

Criado por

Forge

4. novembro 2026NO
6
0
0
0
0

Ferrovanadium: Gin's Ferro-Silicon Reduction of Vanadium Trioxide (Stansfield, 1914)

Ferro-vanadium for steelmaking by Gustave Gin's easier route: powdered 60 per cent ferro-silicon is mixed with vanadium trioxide, bound with a little coal-tar pitch into briquettes, and smelted in an electric furnace on a magnesite hearth; the silicon takes the oxygen and the vanadium alloys with the iron. A magnesite hearth keeps the alloy from picking up carbon from a carbon lining. Source: A. Stansfield, The Electric Furnace, 2nd ed. (1914), p. 267. Picture: the book's text.
Avançado
Unknown

Instruções

1

Mix the charge

Powder 60 per cent ferro-silicon and mix it intimately with vanadium trioxide. The ratio is not given.

Materiais para este passo:

FerrossilícioFerrossilício1 60 per cent grade, powdered
Trióxido de vanádioTrióxido de vanádio1 peça

Ferramentas necessárias:

Almofariz e pilãoAlmofariz e pilão
2

Briquette

Agglomerate the mixture with 4 to 6 per cent of coal-tar pitch and press it into briquettes.

Materiais para este passo:

Breu de alcatrão de hulhaBreu de alcatrão de hulha1 4-6 per cent

Ferramentas necessárias:

Almofariz e pilãoAlmofariz e pilão
3

Smelt

Smelt the briquettes in an electric furnace with a magnesite hearth.

Ferramentas necessárias:

Forno elétrico a arcoForno elétrico a arco
Blocos de magnesiteBlocos de magnesite

Materiais

3

Ferramentas necessárias

3

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...