ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Fire Pit: a Shallow Pit Ringed with Stones
Woody

Criado por

Woody

14. outubro 2026NO
21
0
0
0
0

Fire Pit: a Shallow Pit Ringed with Stones

A fire pit contains a fire and keeps it from spreading. The simplest is a hole dug in the ground; a ring of stones makes a fire ring. Place it at least three metres from any building, clear the ground round it, dig a shallow pit and ring it with dry stones; stones can burst when heated, so choose them with care. The picture: a stone-ringed fire pit beside a forest trail.
Iniciante
An hour or two

Instruções

1

Choose the place

Pick level, open ground at least three metres from buildings, with nothing that can catch overhead. Cut and lift the turf and clear a wide circle down to bare soil.

Ferramentas necessárias:

Pá de cavarPá de cavar
2

Dig the pit

Dig a shallow pit about 80 cm across and 15 cm deep (our size) and pile the soil aside.

Ferramentas necessárias:

Pá de cavarPá de cavar
PáPá
3

Ring it with stones

Set a ring of stones round the edge, bedded into the soil so they do not roll. Use stones that have been lying dry; stones from streams or wet ground hold water and are more likely to burst when heated (our caution).

Materiais para este passo:

PedrasPedras15 peças

Ferramentas necessárias:

PáPá
4

Keep water by

Keep a bucket of water beside it whenever it is lit, and put the fire out fully with water and stirring before leaving it.

Materiais para este passo:

ÁguaÁgua10 litros

Ferramentas necessárias:

Balde metálicoBalde metálico
5

Stones for the ring

A carregar o notebook Jupyter…

Materiais

2
  • 15 peças
    Referência
  • 10 litros
    Referência

Ferramentas necessárias

3

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...