Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL

Refractory Cement: Clay, Iron Filings and Manganese, Fired Hard (Spon's Workshop Receipts)
A fireproof and waterproof cement from Spon's Workshop Receipts: dried clay, clean iron filings, peroxide of manganese, sea salt and borax, ground fine, wetted to a thick paste, applied at once and then heated slowly almost to white heat.
Fired, it is very hard and stands both red heat and boiling water.
Source: Spon, Workshop Receipts, first series, p. 24. Picture: the recipe.
Iniciante
Unknown
Instruções
1
1
Dry and powder the clay
Dry and powder the clay
Dry 4 or 5 parts of clay thoroughly and pulverize it.
Materiais para este passo:
Barro cru de jazida1 4 or 5 partsFerramentas necessárias:
Almofariz e pilão2
2
Mix the powders
Mix the powders
Add 2 parts of fine iron filings free from oxide, 1 part of peroxide of manganese, 1/2 part of sea salt and 1/2 part of borax. Mingle them thoroughly and make the mixture as fine as possible.
Materiais para este passo:
Limalha de ferro1 2 parts, fine, free from oxide
Dióxido de manganês (pirolusite)1 1 part
Sal marinho grosso1 1/2 part
Bórax em pó1 1/2 partFerramentas necessárias:
Almofariz e pilão3
3
Make the paste, apply and fire
Make the paste, apply and fire
Work the powder into a thick paste with as much water as it needs, mixing thoroughly. Use it at once. After applying it, heat it gradually, almost to a white heat.
Materiais para este passo:
Água1 peçaFerramentas necessárias:
Almofariz e pilãoMateriais
6- 1 4 or 5 partsReferência
- 1 2 parts, fine, free from oxideReferência
- 1 1 partReferência
- 1 1/2 partReferência
- 1 1/2 partReferência
- 1 peçaReferência
Materiais de Blueprints conectados
Este projeto faz
CC0 Domínio Público
Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.
Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

