ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL

Gummed Paper Labels: Paper Backed with Gum Arabic, Moistened to Stick
Before self-adhesive labels, labels and stamps were gummed: the back is coated with a water-soluble gum such as gum arabic, left to dry, and moistened when the label is put on. Coat a sheet of paper, dry it flat, and cut it into labels.
The picture: our diagram, coating to cut labels.
Iniciante
An afternoon, plus drying
Instruções
1
1
Make the gum
Make the gum
Soak gum arabic in about twice its weight of warm water until dissolved, warm it gently in a double boiler and strain out bits.
Materiais para este passo:
Goma-arábica50 g
Água0.1 litroFerramentas necessárias:
Conjunto de tigelas para misturar
Banho-maria
Peneira fina2
2
Coat the back
Coat the back
Brush a thin, even coat on the back of the paper sheet. Let it dry and give it a second thin coat.
Materiais para este passo:
Papel2 folhasFerramentas necessárias:
Pincel para cola
Secador3
3
Dry flat
Dry flat
When the gum is dry to the touch, put the sheet between flat boards under a light weight so it does not curl.
Ferramentas necessárias:
Tábuas planas de prensar (par)
Pesos de prensa4
4
Cut the labels
Cut the labels
Write or print on the front, then cut the sheet into labels. To fix one, moisten the gummed side and press it on.
Ferramentas necessárias:
X-ato (faca de precisão)
RéguaFerramentas necessárias
9- Referência
- Referência
- Referência
- Referência
- Referência
- Referência
- Referência
- Referência
- Referência
Este projeto faz
Blueprints relacionados
Estes blueprints compartilham conhecimento — técnicas, materiais ou princípios
CC0 Domínio Público
Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.
Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.


