Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Hafnium: Iodide Vapour Split on a Tungsten Wire Heated beyond 1600 °C (van Arkel and de Boer, US 1,671,213)
Charlie

Criado por

Charlie

1. novembro 2026DE
7
0
0
0
0

Hafnium: Iodide Vapour Split on a Tungsten Wire Heated beyond 1600 °C (van Arkel and de Boer, US 1,671,213)

Hafnium will not come out of its chloride and hydrogen as clean metal. Van Arkel and de Boer instead let the vapour of hafnium iodide pass a white-hot wire in an evacuated vessel: the iodide splits and pure hafnium grows on the wire. Result: hafnium metal deposited on the wire. Source: A. E. van Arkel and J. H. de Boer, US 1,671,213 (1928). The wire runs white-hot; iodine vapour is released. Picture: the patent drawing.
Avançado
1 day

Instruções

1

Set up the vessel and wire

Hang a wire, for example of tungsten, inside the vessel, fixed with small screws to two leading-in wires sealed through its narrowed top. A side tube goes to a pump. For the high temperatures the iodides need, the patent advises a vessel of suitable metal such as chrome iron rather than glass.

Ferramentas necessárias:

Recipiente de vidroRecipiente de vidro
Fio de tungsténioFio de tungsténio
Fonte de alimentação de corrente contínuaFonte de alimentação de corrente contínua
2

Pump out the air

Put the hafnium iodide in the vessel and pump out the air and any other gas that would spoil the reaction.

Materiais para este passo:

Iodeto de háfnioIodeto de háfnio1 as required

Ferramentas necessárias:

Bomba de vácuoBomba de vácuo
3

Evaporate the iodide

Heat the vessel until the iodide gives enough vapour. The patent gives 400-600 °C only for zirconium iodide; for hafnium iodide the temperature is not given. Ours: a furnace round the vessel.

Ferramentas necessárias:

Forno tubularForno tubular
4

Deposit hafnium on the white-hot wire

Pass a current through the wire to heat it beyond 1600 °C while the iodide vapour flows along it. The iodide splits and hafnium deposits on the wire. Do not overheat: the deposit can alloy with the wire.

Ferramentas necessárias:

Fonte de alimentação de corrente contínuaFonte de alimentação de corrente contínua
PirómetroPirómetro
Fio de tungsténioFio de tungsténio

Materiais

1

Ferramentas necessárias

6

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...