Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Saddler's Stitching Clam From Two Oak Barrel Staves on a Dovetailed Deal Base (Hasluck, Harness Making, 1904)
Woody

Criado por

Woody

14. novembro 2026NO
6
0
0
0
0

Saddler's Stitching Clam From Two Oak Barrel Staves on a Dovetailed Deal Base (Hasluck, Harness Making, 1904)

The home-made saddler's clamp from P. N. Hasluck's Harness Making (1904): two curved oak barrel staves, 2 ft long, screwed into a dovetail tenon on a 20 in deal block so their thinned upper ends spring tightly together as jaws. Held slanting between the knees, it grips the work while both hands stitch.
Intermediário
About half a day

Instruções

1

Parts in centimetres

A carregar o notebook Jupyter…
2

Read Harness Making

"A clamp can be made easily by the worker at home."
3

Shape the staves

Cut two oak cask or barrel staves 2 ft long and at least 3 in wide, the most curved part in the centre (the more bent, the more useful). Clean the outside with a spokeshave, leaving one end the full thickness (about 1 in) and thinning gradually to about 3/4 in toward the upper ends, which form the jaws (Fig. 55). Round the outer corners, flatten the inside, and glass-paper both sides.

Materiais para este passo:

Aduela de barrilAduela de barril2 peças

Ferramentas necessárias:

SerroteSerrote
Plaina de raspar curvasPlaina de raspar curvas
LixaLixa
4

Cut the base

Cut the lower part C from sound white deal, 20 by 3 by 3 in, with a dovetail-shaped tenon at least 6 in long. Fit the shoulders and the width of its upper end to the curve of your staves so that it takes energetic screwing to bring the staves home and their jaws press tightly together.

Materiais para este passo:

Tábua de pinhoTábua de pinho1 peça

Ferramentas necessárias:

SerroteSerrote
FormõesFormões
Maço de madeiraMaço de madeira
Plaina manualPlaina manual
5

Screw together

Screw the staves to the tenon with eight stout 2-1/4 in screws, countersunk flush (Fig. 54).

Materiais para este passo:

Parafusos para madeiraParafusos para madeira8 peças

Ferramentas necessárias:

Arco de pua e brocaArco de pua e broca
Conjunto de brocas de escarearConjunto de brocas de escarear
Chave de fendasChave de fendas
6

Use it

Hold the clamp slanting between the knees, resting against the left knee, with the right leg thrown over it, so the work is held fast between the jaws and both hands are free for the awl and two needles.
7

Troubleshooting

Clamp troubleshooting.

Flow

Loading...
8

History and honest limits

From Paul N. Hasluck, **Harness Making** (1904), "Harness-makers' Tools" (checked on the archive.org scan harnessmaking00hasl, pp. 24-27). The tools and metric figures are ours.

Materiais

3

Ferramentas necessárias

9

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...