Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL

Snaffle Riding Bridle: Cheeks, Slit Head Strap, Front, Throat Lash and Reins (Hasluck, Saddlery, 1904)
The plain riding bridle, "a single head and rein bridle", from Paul N. Hasluck's Saddlery (1904): two cheeks buckled to a snaffle bit, a head strap slit at each end into cheek and throat-lash straps, a front (browband), a throat lash and a pair of buckled reins. Every size is his; the bit is bought.
It is the riding counterpart of the cart bridle.
Intermediário
About 1 day
Instruções
1
1
Cutting list
Cutting list
A carregar o notebook Jupyter…
2
2
Read Saddlery, ch. VI
Read Saddlery, ch. VI
"All the stitching must be done from behind, so that the best face of the stitches will be next the horse when the bridle is on."
3
3
Make the cheeks
Make the cheeks
Cut two cheeks about 7/8 in wide and 9 in long. Each has a buckle at each end: one on a chape turned down, the other on the flat end of the strap without turning, with the billet underneath. Leave room for a loop before the buckle and the point of the cheek, and set the billet far enough behind the buckle for two loops; put a runner loop on the cheek and stitch another in with the chape. Cut the billets 9 in long. Stitch them in single-handed and back-stitch with linen thread, all from behind. Make one hole in each billet.
Materiais para este passo:
Couro para arreios1 peça
Fivela de latão com agulha4 peças
Fio de linho1 peçaFerramentas necessárias:
Faca para couro
Biselador de bordos
Dobradeira
Vazador de costura
Sovela
Duas agulhas de correeiro
Torno de seleiro
Forma de passadores
Vazador para couro4
4
Make the head strap
Make the head strap
Cut the head strap 1-1/8 in by 1 ft 10 in and slit it 5 in at each end. For a 3/4 in cheek, slit 3/4 in on one side and 3/8 in for a 3/8 in throat lash, with the wide slits on the same side at both ends. Punch four holes in each wide slit and six, closer together, in each narrow one.
Materiais para este passo:
Couro para arreios1 peçaFerramentas necessárias:
Faca para couro
Vazador para couro
Fita métrica5
5
Make the front
Make the front
Cut the front 3/4 in by 1 ft 2-1/4 in from the end of one bend to the other, after bending. Turn it over the head strap and mark a line across close to it, so there is 1 ft 1 in between the cross lines. Stitch the ends down, with a row along each side.
Materiais para este passo:
Couro para arreios1 peça
Fio de linho1 peçaFerramentas necessárias:
Faca para couro
Vazador de costura
Sovela
Duas agulhas de correeiro6
6
Make the throat lash
Make the throat lash
Make the throat lash 3/8 in by 1 ft 7 in after turning down for the buckles. Put two runner loops on it besides the loops at the buckles of each end.
Materiais para este passo:
Couro para arreios1 peça
Fivela de latão com agulha2 peças
Fio de linho1 peçaFerramentas necessárias:
Faca para couro
Sovela
Duas agulhas de correeiro
Forma de passadores7
7
Make the reins
Make the reins
Cut the reins 1 in or 7/8 in by 4 ft. Prepare them for the bit buckles like the bottom of the cheeks, in the flat. Put a 3/4 in covered buckle on the other end of one rein, narrowing its chape to the buckle's width, and narrow the end of the other rein for buckling. Put in the billets, 10 in long, with one loop before the buckle and two behind, "and always put the strong end of the rein in the billet end".
Materiais para este passo:
Couro para arreios1 peça
Fivela de latão com agulha3 peças
Fio de linho1 peçaFerramentas necessárias:
Faca para couro
Sovela
Duas agulhas de correeiro
Forma de passadores8
8
Put it together
Put it together
Buckle the cheeks to the head strap's wide slits and the throat lash to the narrow ones, run the front over the head strap, buckle the cheeks' lower ends and the reins to the snaffle bit's rings, and buckle the two reins together. Buckled billets let the bit be taken off, which he prefers to stitching the cheeks and reins fast to it.
Materiais para este passo:
Bridão1 peça9
9
Troubleshooting
Troubleshooting
Riding bridle troubleshooting.
Flow
Loading...
10
10
History and honest limits
History and honest limits
From **Saddlery**, edited by Paul N. Hasluck, David McKay, 1904 (archive.org saddlery00hasl), chapter VI, "Riding Bridles", the snaffle bridle; every fraction was read on the scan. Not made here: his Pelham, Weymouth, gag, exercising and stallion bridles. The bit is bought. The metric figures are ours.
Materiais
4- 5 peçasReferência
- 4 peçasReferência
- 4 peçasReferência
- 1 peçaReferência
Ferramentas necessárias
10- Referência
- Referência
- Referência
- Referência
- Referência
- Referência
- Referência
- Referência
- Referência
- 1 vendor sell this, none ship to you yetReferência
Este projeto faz
Blueprints relacionados
Estes blueprints compartilham conhecimento — técnicas, materiais ou princípios
CC0 Domínio Público
Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.
Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.


