Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Web Saddle Girth: Pointed Leather Chapes and Safety-Bar Buckles (Hasluck, Saddlery, 1904)
Tex

Criado por

Tex

13. novembro 2026FO
5
0
0
0
0

Web Saddle Girth: Pointed Leather Chapes and Safety-Bar Buckles (Hasluck, Saddlery, 1904)

The girth goes under the horse's belly and buckles to the saddle on both sides. This is the web saddle girth from Paul N. Hasluck's Saddlery (1904): linen, worsted or union web, 3 ft to 3 ft 6 in long, with pointed leather chapes and girth buckles that have safety bars. He gives no web width; the picture is our diagram from his text.
Iniciante
About 3 hours

Instruções

1

His length in centimetres

A carregar o notebook Jupyter…
2

Read Saddlery, ch. V

"Saddle girths (Figs. 12, 13, and 14) are made of linen, worsted, or union (that is part linen and part wool); they are also made of raw hide, whipcord, and plaited brown leather. It is, however, more common to employ the first-named material."
3

Cut the web and the chapes

Cut the web 3 ft to 3 ft 6 in long. Get girth buckles with safety bars across them. Cut the chapes pointed at the ends, swelling out at the sides and growing narrow to the width of the buckle at the top, where they bend.

Materiais para este passo:

Fita de cilhaFita de cilha1 peça
Couro para arreiosCouro para arreios1 peça
Fivela de cilhaFivela de cilha2 peças

Ferramentas necessárias:

Faca para couroFaca para couro
TesouraTesoura
Fita métricaFita métrica
4

Prepare the web ends

Stain the edges of the chapes. Turn in both corners of the web to meet in the centre, run a stitch through them to keep them down, and cut a little off the extreme point.

Materiais para este passo:

Tinta para couroTinta para couro1 peça
Fio de linhoFio de linho1 peça
Cera de abelhaCera de abelha1 peça

Ferramentas necessárias:

Faca para couroFaca para couro
Duas agulhas de correeiroDuas agulhas de correeiro
5

Tack and stitch the chapes

Tack the chapes and buckles in place before stitching. Always stitch the chapes round, and put a straight line in the centre to keep down the point of the turn-down; only about twelve or fifteen stitches go in the centre.

Materiais para este passo:

Tachas de montarTachas de montar1 peça
Fio de linhoFio de linho1 peça
Cera de abelhaCera de abelha1 peça

Ferramentas necessárias:

MarteloMartelo
SovelaSovela
Duas agulhas de correeiroDuas agulhas de correeiro
Torno de seleiroTorno de seleiro
6

Troubleshooting

Saddle girth troubleshooting.

Flow

Loading...
7

History and honest limits

From **Saddlery**, edited by Paul N. Hasluck, David McKay, 1904 (archive.org saddlery00hasl), chapter V, saddle girths, pp. 47-48; read on the scan. He gives no web width and does not say how many buckles go on each end; his Figs. 12-14 show cord girths, not this web girth, so the picture is our own diagram from his text. One buckle per end in the list, the thread, tools and metric figures are ours.

Materiais

7

Ferramentas necessárias

7

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...