Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL

Homemade Hacksaw Frame Cut from Hard Wood (Boy Mechanic, 1915)
A hacksaw frame sawn from one piece of hard wood: the blade is bolted into a slot at the handle end and tensioned at the far end by a bolt with a bent sheet-metal head whose tongue sits in a saw cut so the blade cannot twist.
Iniciante
Two hours
Instruções
1
1
Read the Boy Mechanic
Read the Boy Mechanic
"The frame is made of hard wood. The saw end is inserted in a slot sawed in the handle end, and a screw or small bolt holds it in place."
2
2
Cut the frame
Cut the frame
Saw the frame from one piece of hard wood as in the figure: a long back with a handle end (with a hand-hole) and a short far end, open between them for the blade.
Materiais para este passo:
Tábua de madeira de lei1 peçaFerramentas necessárias:
Serrote
Serra de recortes
Arco de pua e broca
Limas (lima de mão)3
3
Fix the handle end
Fix the handle end
Saw a slot in the handle end, slip one end of the blade in, and hold it with a screw or small bolt through the blade's hole.
Materiais para este passo:
Lâmina de serrote de metal1 peça
Parafuso de carroçaria1 peçaFerramentas necessárias:
Serrote
Berbequim de mão4
4
Make the tension bolt
Make the tension bolt
Bend a sheet-metal head onto a bolt (A in the figure) and fix the blade's other end to it. Pass the bolt through the far end of the frame and tighten its nut to draw the blade taut. A projection of the sheet metal fits a saw cut in the frame so the blade cannot turn.
Materiais para este passo:
Chapa de folha de flandres1 peça
Parafuso de carroçaria1 peça
Porca borboleta1 peçaFerramentas necessárias:
Tesoura de chapa
Alicate de bico chato
Berbequim de mão
Serrote5
5
Troubleshooting
Troubleshooting
Wooden hacksaw troubleshooting.
Flow
Loading...
6
6
History and honest limits
History and honest limits
From **The Boy Mechanic, Book 2** (Popular Mechanics, 1915), p. 426, by W. A. Henry (checked on the archive.org scan boymechanicbook200chic2). No sizes are given; the wing nut and tools are ours.
Materiais
5- 1 peçaReferência
- Referência
- 2 peçasReferência
- Referência
- 1 peçaReferência
Ferramentas necessárias
7- Referência
- Referência
- Referência
- Referência
- Referência
- Referência
- Referência
Este projeto faz
Blueprints relacionados
Estes blueprints compartilham conhecimento — técnicas, materiais ou princípios
CC0 Domínio Público
Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.
Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

