Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Iron Ball Mill: Grüson Drum with a Stepped Die Ring and Two Screens (Richards, 1903)
Forge

Criado por

Forge

3. novembro 2026NO
5
0
0
0
0

Iron Ball Mill: Grüson Drum with a Stepped Die Ring and Two Screens (Richards, 1903)

The Grüson ball mill: a drum turning on a horizontal axis, charged with chilled iron or steel balls of mixed sizes. The balls grind the ore against each other and against a stepped die ring. The ground ore passes out through a coarse and a fine screen; the oversize is carried back in. Result: a mill for fine grinding of cement, fertiliser, clay and soft ores, wet or dry. Sizes from 0.66 m to 1.83 m across. Source: R. H. Richards, Ore Dressing, vol. I (1903), § 225, Figs. 172a-b and Table 149. Unknown: dimensions beyond the table, and the materials of the side plates, screens and shaft. Picture: Richards, Figs. 172a-b.
Avançado
Unknown

Instruções

1

Make the drum and the die ring

The drum is two side plates (b) joined round the edge by the die ring (a). The die ring is five perforated, spiral plates of chilled iron. Each plate laps the next, so they form steps: the balls drop from one step to the next, and the space under each step lets the oversize from the screens back in. Not given: the side-plate material, sizes, hole sizes.

Materiais para este passo:

Peças fundidas de ferroPeças fundidas de ferro5 die plates, chilled iron
Material desconhecidoMaterial desconhecido2 side plates

Ferramentas necessárias:

Dimensões desconhecidasDimensões desconhecidas
Chave inglesa ajustávelChave inglesa ajustável
2

Put the two screens round it

Outside the die ring, fit a coarse perforated screen (c) to take the wear. It is in five parts with spaces between them and has back-deflecting holes (g). Outside that, fit a fine gauze screen (d). At the end of each section of fine screen, fix a deflector or shovel (f). As the drum turns, it carries the oversize up and back into the grinding space. Not given: the screens' metal and mesh.

Materiais para este passo:

Chapa perfurada de crivoChapa perfurada de crivo1 coarse screen, 5 parts
Tela de arame tecido para crivoTela de arame tecido para crivo1 fine screen
Material desconhecidoMaterial desconhecido5 deflectors

Ferramentas necessárias:

Dimensões desconhecidasDimensões desconhecidas
Chave inglesa ajustávelChave inglesa ajustável
3

Mount and house it

Carry the drum on a horizontal shaft in two bearings; the figures show them on masonry piers. Enclose the drum in a plate iron housing with a discharge spout (e) below, a feed hopper (h) at one end, a manhole (i) and a dust pipe (k) on top. Ours: steel sheet for the plate iron.

Materiais para este passo:

Veio de açoVeio de aço1 mill shaft
Suporte de rolamentoSuporte de rolamento2 peças
Chapa de aço macioChapa de aço macio1 housing, spout, hopper

Ferramentas necessárias:

Chave inglesa ajustávelChave inglesa ajustável
Dimensões desconhecidasDimensões desconhecidas
4

Fit the drive

Drive the mill by gear and pinion. In the figure, the gear is on the mill shaft and the pinion on a countershaft that carries tight and loose pulleys. A belt from the line shaft runs on the pulleys: on the tight pulley the mill turns, on the loose pulley it stops.

Materiais para este passo:

Roda dentada movidaRoda dentada movida1 on the mill shaft
PinhãoPinhão1 peça
Veio de açoVeio de aço1 countershaft
Suporte de rolamentoSuporte de rolamento2 peças
Polias fixa e loucaPolias fixa e louca1 peça

Ferramentas necessárias:

Correia de transmissãoCorreia de transmissão
Chave inglesa ajustávelChave inglesa ajustável
5

Charge the balls (size sets the charge)

Load chilled iron or steel balls in mixed sizes; mixed sizes grind better than one size. Size is the variable: No. 0 (0.660 m drum, 45 rev/min) takes 15 kg of 40 mm and 45 kg of 80 mm balls, 60 kg in all. No. 2 (1.330 m, 30 rev/min) takes 100 kg each of 100, 115 and 125 mm, 300 kg. No. 4 (1.830 m, 25 rev/min) takes 217 kg each of the same three sizes, 650 kg. The bigger the drum, the slower it turns and the heavier its charge.

Materiais para este passo:

Corpos moedores (bolas de aço)Corpos moedores (bolas de aço)300 kg for No. 2; 60 kg No. 0, 650 kg No. 4

Ferramentas necessárias:

Balança industrial de plataformaBalança industrial de plataforma
6

Grind

Feed the ore, egg-size, through the hopper and run the mill wet or dry. Power, and output per 24 hours: No. 0 takes 1/4 horse power and grinds 1,680 kg of copper ore to 15 mesh, or 840 kg of chrome iron ore to 130 mesh. No. 2 takes 2 1/2 to 3 horse power: 14,400 kg of brick bats to 20 mesh, or 1,920 kg of emery to 200 mesh. No. 4 takes 9 to 11 horse power: 12,720 kg of gold ores to 40 mesh, or 10,800 kg of chrome iron ore to 130 mesh. Wear: 1,345 kg of balls for 102,400 barrels of cement, about 0.139 lb a ton. The end plates last 18 months. Hard quartz ores wear the balls too much.

Ferramentas necessárias:

Correia de transmissãoCorreia de transmissão
ÁguaÁgua

Materiais

11

Ferramentas necessárias

5

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...