Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Iron Retort: a Mercury Flask with an Iron Tube Screwed In (Morfit, 1849)
Charlie

Criado por

Charlie

7. novembro 2026DE
8
0
0
0
0

Iron Retort: a Mercury Flask with an Iron Tube Screwed In (Morfit, 1849)

A small iron retort for distilling dry substances that need a high heat. Campbell Morfit (1849) says all iron retorts should be of cast metal, but gives a simpler and cheaper one: an empty mercury flask with an iron gas tube or gun barrel screwed into the top, reaching nearly to the bottom, and another tube bent downwards (his Fig. 205). The retort is heated in a furnace. Flask size, tube sizes and how the side tube is joined are not given. Source: C. Morfit, Chemical and Pharmaceutic Manipulations (1849), pp. 241-242. Picture: Fig. 205.
Iniciante
Unknown

Instruções

1

Read Morfit

"A simpler and more economical apparatus is a mercury flask, Fig. 205, with an iron gas tube or gun barrel screwed into the top, and reaching nearly to the bottom, and another tube bent downwards. This arrangement, well fitted for distilling dry substances which require a high heat, may be modified by removing the centre pipe and inserting a screw plug, and thus be made well adapted to the distillation of mercury."
2

Screw in the centre tube

Take an empty mercury flask. Screw an iron tube into the top so that it reaches nearly to the bottom of the flask (Fig. 205). Ours: thick-walled steel pipe with threaded ends stands for the iron gas tube. Its bore and length are not given.

Materiais para este passo:

Frasco de mercúrioFrasco de mercúrio1 peça
Tubo de aço (de parede grossa, com roscas)Tubo de aço (de parede grossa, com roscas)1 centre tube

Ferramentas necessárias:

Chave de tubosChave de tubos
3

Fit the bent side tube

Fit a second tube at the top of the flask, bent so it leads away to the receiver (Fig. 205). Morfit does not say how this tube is joined to the flask or how it is bent (unknown).

Materiais para este passo:

Tubo de aço (de parede grossa, com roscas)Tubo de aço (de parede grossa, com roscas)1 side tube
Conector desconhecidoConector desconhecido1 peça

Ferramentas necessárias:

Torno de bancadaTorno de bancada
Chave de tubosChave de tubos
4

History and honest limits

Faraday (Chemical Manipulation, 1830) describes small iron retorts as bottles with an iron tube fitted by a ground joint, used mostly for distilling oxygen, and heated best by a coal or coke fire. Morfit heats all iron retorts in furnaces, greases them when not in use against rust, and keeps them stoppered. For mercury he takes out the centre pipe and puts in a screw plug. Not given: flask size, tube bore and length, how the side tube is joined and bent.

Materiais

3

Ferramentas necessárias

2

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...