Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL

Perigoso
Isobutane: Normal Butane Isomerised over Aluminium Chloride and Hydrogen Chloride at 150 °C (Ipatieff & Pines, US 2,318,226)
Heated under pressure with aluminium chloride and a little hydrogen chloride, straight-chain normal butane rearranges into branched isobutane, the gas that alkylation needs. About two thirds of the butane comes out as isobutane.
Result (Ex. I): after 12 hours at 150 °C the hydrocarbons were 66.5 % isobutane and 31.9 % normal butane.
Variable: batch or continuous. A rotated pressure vessel suits small scale; a continuous run through a heated tube and reaction chamber at 160 °C gave about 63 % isobutane.
Source: Ipatieff & Pines, US 2,318,226 (1943). Not given: how the butanes were fractionated, vessel size, how it was heated. Danger: hydrogen chloride gas burns eyes and lungs, and the vessel runs at about 30 atmospheres. Picture drawn by Youblob.
Especialista
1 day
Conteúdo perigoso
Este blueprint contém procedimentos perigosos. Faça login e ative o conteúdo perigoso nas configurações da sua conta para ver as instruções passo a passo.
EntrarEste projeto faz
Blueprints relacionados
Estes blueprints compartilham conhecimento — técnicas, materiais ou princípios

Normal Butane: the 0 °C Cut of the Lightest Gasoline, Distilled Twenty Times in the Cold (Mabery & Hudson 1897)
por Charlie
Industrial
11
0
0
0
0
0

Perigoso
Aluminium Chloride: Hydrogen Chloride over Hot Aluminium
por Charlie
Inorgânico
18
0
0
0
0
0

Perigoso
Hydrogen Chloride Gas from Salt and Sulphuric Acid
por Charlie
Inorgânico
15
0
0
0
0
0
CC0 Domínio Público
Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.
Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.
