Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL

Pipe Rack: Leather-Edged Bowl Recesses and a Notched Stem Rail That Lets the Pipes Drain (King, 1904)
Roland King of Newport, Rhode Island, received US 769,350, dated 6 September 1904, for a pipe rack that holds each tobacco pipe bowl-down in an egg-shaped recess edged with soft leather, its stem resting in a notch of a raised rail behind, so moisture drains from the stem into the bowl. A classic gift for Father's Day.
We make it from hardwood with calf leather edging. All sizes are ours.
Iniciante
About 3 hours
Instruções
1
1
Spacing
Spacing
A carregar o notebook Jupyter…
2
2
Read US 769,350
Read US 769,350
"It will be seen that my pipe-rack is of exceedingly simple construction and one which insures the pipes being supported thereon in the correct position to drain moisture from the stem into the bowl."
3
3
Cut and hollow the base
Cut and hollow the base
Cut the base A from a hardwood board to the notebook's length. Mark the egg-shaped recesses B along the front, bore each out with the brace and bit and shape it to an egg with a gouge, so a pipe bowl sits in it.
Materiais para este passo:
Tábua de madeira de lei1 peçaFerramentas necessárias:
Fita métrica
Lápis
Serrote
Arco de pua e broca
Goiva
Lixa4
4
Edge the recesses with leather
Edge the recesses with leather
Cut thin strips of soft calf leather and glue them round the edge of each recess with contact cement, his cushion edging C, so the bowls are not nicked or scratched.
Materiais para este passo:
Couro de vitela1 peça
Cola de contacto1 peçaFerramentas necessárias:
X-ato (faca de precisão)5
5
Make the stem rail
Make the stem rail
Cut the rack E from the same board and cut a notch e in its front edge opposite each recess, wide enough for a pipe stem, rounded and sanded smooth.
Materiais para este passo:
Tábua de madeira de lei1 peçaFerramentas necessárias:
Serrote
Serra de recortes
Grosa para madeira
Lixa6
6
Raise the rail
Raise the rail
Drill the back edge of the base and the underside of the rail and glue in a row of dowel pins D, holding the rail above the rear edge of the base at the notebook's height.
Materiais para este passo:
Cavilhas de madeira dura1 peça
Cola de madeira1 peçaFerramentas necessárias:
Berbequim de mão
Serrote7
7
Use it
Use it
Set each pipe with its bowl in a recess and its stem in the notch above: the stem slopes down toward the bowl.
8
8
Troubleshooting
Troubleshooting
Pipe rack troubleshooting.
Flow
Loading...
9
9
History and honest limits
History and honest limits
**Roland King** of Newport, Rhode Island, US 769,350, dated 6 September 1904, filed 12 May 1903. He claimed "a pipe-rack having a base A, in which are provided one or more egg-shaped recesses ... to receive the bowls of pipes, in combination with a stem-supporting rack E, supported above one edge of the base and provided with notches to hold the pipe-stems". He gives no sizes: the hardwood, calf, all sizes and the number of pipes are ours.
Materiais
5- 1 peçaReferência
- 1 peçaReferência
- 1 peçaReferência
- 1 peçaReferência
- 1 peçaReferência
Ferramentas necessárias
10- 1 vendor sell this, none ship to you yetReferência
- 1 vendor sell this, none ship to you yetReferência
- Referência
- Referência
- Referência
- Referência
- Referência
- Referência
- Referência
- Referência
Este projeto faz
Blueprints relacionados
Estes blueprints compartilham conhecimento — técnicas, materiais ou princípios
CC0 Domínio Público
Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.
Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.


