Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL

Lathe Dog: Cut from Iron Pipe with Setscrews (Boy Mechanic, 1915)
A cheap lathe dog for turning work between centres: a short piece of iron pipe clamped on the work by setscrews, with a 1 in tongue left standing that the faceplate drives.
Source: The Boy Mechanic, Book 2 (1915), p. 319. Picture: the book's sketch of both forms.
Iniciante
Unknown
Instruções
1
1
Cut the pipe
Cut the pipe
Cut a section of iron pipe 1 1/2 to 3 in long, big enough to slip over the work. Cut part of it away, leaving a projecting tongue of metal 1 in wide for the faceplate to drive (sketch, left).
Materiais para este passo:
Tubo de aço (de parede grossa, com roscas)1 1 1/2 to 3 inFerramentas necessárias:
Arco de serra para metais com lâminas
Lima para metal2
2
Fit the setscrews
Fit the setscrews
Drill and tap the round part for one or more setscrews and screw them in; they grip the work.
Materiais para este passo:
Parafuso sem cabeça de ponta côncava1 one or moreFerramentas necessárias:
Berbequim de mão
Jogo de machos e cossinetesMateriais
2- 1 1 1/2 to 3 inReferência
- 1 one or moreReferência
Ferramentas necessárias
4- Referência
- Referência
- Referência
- Referência
Este projeto faz
CC0 Domínio Público
Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.
Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.
