Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Lathe Dog: Two U-Clamps Bolted on the Work (Boy Mechanic, 1915)
Forge

Criado por

Forge

4. novembro 2026NO
8
0
0
0
0

Lathe Dog: Two U-Clamps Bolted on the Work (Boy Mechanic, 1915)

A driver for large work where a bought dog would cost too much: two U-clamps bolted together round the work, driven by a bolt set in the lathe faceplate. Source: The Boy Mechanic, Book 2 (1915), p. 319. Picture: the book's sketch of both forms.
Iniciante
Unknown

Instruções

1

Clamp on the work

Put two U-clamps face to face round the work and draw them tight with two bolts (sketch, right).

Materiais para este passo:

Abraçadeira em UAbraçadeira em U2 peças
Parafuso de cabeça hexagonal - classe 8.8Parafuso de cabeça hexagonal - classe 8.82 peças

Ferramentas necessárias:

Chave inglesa ajustávelChave inglesa ajustável
2

Drive from the faceplate

Fix a bolt in the faceplate so it bears against the clamp; it turns the work.

Materiais para este passo:

Parafuso de cabeça hexagonal - classe 8.8Parafuso de cabeça hexagonal - classe 8.81 driving bolt

Ferramentas necessárias:

Chave inglesa ajustávelChave inglesa ajustável

Materiais

2

Ferramentas necessárias

1

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...