ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Lead Sheet Cast on a Tilted Iron Plate, Ure 1839
Forge

Criado por

Forge

14. outubro 2026NO
23
0
0
0
0

Lead Sheet Cast on a Tilted Iron Plate, Ure 1839

Thin lead sheet can be cast without rolling. Andrew Ure (1839) describes the white-lead works: melted lead is poured on an iron plate over the pot, and as soon as its surface begins to set the plate is tipped, so the still-liquid lead runs back and leaves a thin sheet that lifts off like paper. Their sheets were 1/24 inch thick or less. The picture: our diagram, the plate tipped over the pot as the liquid runs off.
Intermediário
An afternoon

Instruções

1

Melt the lead

Melt lead in a cast-iron pot over the fire. Work outdoors, keep food and drink away, and wash your hands after.

Materiais para este passo:

Lingote de chumboLingote de chumbo5 kg
Carvão vegetalCarvão vegetal3 as required

Ferramentas necessárias:

Cadinho de ferro fundidoCadinho de ferro fundido
Forja de ferreiroForja de ferreiro
Máscara antipoeirasMáscara antipoeiras
Luvas de soldadorLuvas de soldador
Óculos de segurançaÓculos de segurança
2

Set the plate

Lay a clean, dry iron plate across the pot so it can be tipped toward one side to drain into the pot.

Ferramentas necessárias:

Chapa de ferro (martelada)Chapa de ferro (martelada)
Cadinho de ferro fundidoCadinho de ferro fundido
Luvas de soldadorLuvas de soldador
Óculos de segurançaÓculos de segurança
3

Pour and tip

Ladle lead onto the plate. The moment its surface starts to set, tip the plate so the liquid runs back into the pot; the thin set layer stays as a sheet.

Ferramentas necessárias:

Colher de fundiçãoColher de fundição
Chapa de ferro (martelada)Chapa de ferro (martelada)
Luvas de soldadorLuvas de soldador
Óculos de segurançaÓculos de segurança
4

Lift and repeat

Lift the sheet off, cool the plate with water, and pour again. Trim the sheets with snips.

Materiais para este passo:

ÁguaÁgua5 litros

Ferramentas necessárias:

Tesoura de chapaTesoura de chapa
Luvas de soldadorLuvas de soldador
Óculos de segurançaÓculos de segurança
5

Sheet from a pot

A carregar o notebook Jupyter…

Materiais

3

Ferramentas necessárias

8

Blueprints relacionados

Estes blueprints compartilham conhecimento — técnicas, materiais ou princípios

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...