Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL

Folding Ground Seat With Adjustable Back Rest: Three Oak Frames, Duck Covers and a Notched Base (Boy Mechanic, 1919)
T. H. Linthicum's folding ground seat from The Boy Mechanic, Book 3 (1919): an 18 x 20 in duck seat and an 18 x 22 in duck back hinged to an open oak base frame, with a 19-1/2 in adjusting frame that drops into notches 2 in apart to set the back. It folds flat and also serves across a bed or trunk.
Intermediário
About 1 day
Instruções
1
1
Frames in centimetres
Frames in centimetres
A carregar o notebook Jupyter…
2
2
Read The Boy Mechanic, Book 3
Read The Boy Mechanic, Book 3
"Those who enjoy sitting or lying upon the grass while reading will find the device shown in the illustration convenient and comfortable."
3
3
Make the three frames
Make the three frames
From oak (or other common wood) make three rectangular frames with mortise-and-tenon joints, to his dimensions: the back 18 by 22 in, the seat 18 by 20 in and the base 18 by 20 in. Cut adjusting notches in the base sides 2 in apart.
Materiais para este passo:
Tábua de carvalho-branco3 peças
Cola de madeira1 peçaFerramentas necessárias:
Serrote
Formões
Maço de madeira
Plaina manual
Fita métrica
Lápis4
4
Make the adjusting frame
Make the adjusting frame
Make the adjusting frame 19-1/2 in wide outside and 18 in inside, 11 in high, of 1-1/4 in stock, with the end details drawn 3/4, 1/4 and 3/8 in; its foot drops into the base notches.
Materiais para este passo:
Tábua de carvalho-branco1 peça
Cola de madeira1 peçaFerramentas necessárias:
Serrote
Formões
Plaina manual5
5
Cover the seat and back
Cover the seat and back
Cover the seat and back frames with heavy duck, turning it in 1/2 in at the edges (tacks are ours).
Materiais para este passo:
Lona de algodão1 peça
Sortido de tachas de estofador1 peçaFerramentas necessárias:
Tesoura
Martelo6
6
Hinge and assemble
Hinge and assemble
Hinge the back and the seat to the base, and fasten the adjusting frame to the back with screws so it can fold; drop its foot into a base notch to set the back's angle.
Materiais para este passo:
Dobradiça de livro4 peças
Parafusos para madeira1 peçaFerramentas necessárias:
Berbequim de mão
Chave de fendas7
7
Using it
Using it
Ground seat use.
Flow
Loading...
8
8
History and honest limits
History and honest limits
From "A Folding Ground Seat with Back Rest" by T. H. Linthicum, in **The Boy Mechanic, Book 3**, Popular Mechanics, 1919 (Project Gutenberg 71856; checked on the archive.org scan boymechanic0003unse, p. 190). He gives the frame sizes in the drawing but not every rail section or the notch depth. The tools and metric figures are ours.
Materiais
6- 3 peçasReferência
- 2 peçasReferência
- 1 peçaReferência
- Referência
- 4 peçasReferência
- 1 peçaReferência
Ferramentas necessárias
10- Referência
- Referência
- Referência
- Referência
- 1 vendor sell this, none ship to you yetReferência
- 1 vendor sell this, none ship to you yetReferência
- Referência
- Referência
- Referência
- Referência
Este projeto faz
Blueprints relacionados
Estes blueprints compartilham conhecimento — técnicas, materiais ou princípios
CC0 Domínio Público
Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.
Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

