Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Dog Kennel Whose Top Tilts Back on Lift-Off Hinges to Air and Clean It (Minion, 1909)
Woody

Criado por

Woody

13. novembro 2026NO
5
0
0
0
0

Dog Kennel Whose Top Tilts Back on Lift-Off Hinges to Air and Clean It (Minion, 1909)

John S. Minion of Newark received US 920,975, dated 11 May 1909, for a kennel in two parts. The top half, with the roof, sits on the bottom half and hinges at the back on slotted plates and studs, so it can be tilted back to let the sun in and clean the floor, or lifted right off. A swinging arm drops down by itself to hold it open. We build it from pine. All sizes are ours.
Intermediário
About 1 day

Instruções

1

Size for the dog

A carregar o notebook Jupyter…
2

Read US 920,975

"The upper portion can be tilted back as shown in Fig. 1 so as to permit the cleaning of the lower portion, and also allow sunlight to penetrate therein over its whole surface, which makes a sanitary structure."
3

Build the lower portion

Build an open box of pine boards with upright sides and a floor, his portion 10, raised on two strips 12 so air passes under it. Cut the entrance 11 in the front.

Materiais para este passo:

Tábua de pinhoTábua de pinho1 peça
Pregos galvanizadosPregos galvanizados1 peça

Ferramentas necessárias:

Fita métricaFita métrica
SerroteSerrote
Serra de recortesSerra de recortes
Martelo de unhaMartelo de unha
4

Build the upper portion

Build the top half, his portion 13, with sides that stand on the lower sides, a gabled roof 16, and an opening 15 matching the entrance. Nail strips 14 round its lower edge outside so they overlap the lower portion, shed water and make a tight joint.

Materiais para este passo:

Tábua de pinhoTábua de pinho1 peça
Pregos galvanizadosPregos galvanizados1 peça

Ferramentas necessárias:

SerroteSerrote
Serra de recortesSerra de recortes
Martelo de unhaMartelo de unha
5

Fit the lift-off hinge

Screw a flat-bar plate to the back of each lower side, projecting behind, with a slot cut in its top edge (his plates 32 and slots 33). Screw a plate with a bolt as a stud to each side of the upper portion so the studs drop into the slots when the top is set down (his plates 34 and studs 35). The top now tilts back on the studs or lifts off.

Materiais para este passo:

Barra chata de aço macioBarra chata de aço macio1 peça
Parafuso de carroçariaParafuso de carroçaria1 peça
Parafusos para madeiraParafusos para madeira1 peça

Ferramentas necessárias:

Serra de arco para metaisSerra de arco para metais
Jogo de limasJogo de limas
Engenho de furarEngenho de furar
Jogo de brocasJogo de brocas
Conjunto de chaves de fendasConjunto de chaves de fendas
6

Fit the prop arm

Hang a flat-bar arm from a hinge at the top of the back of the upper portion (his arm 24 and hinge 23). Join its lower part to a bracket on the lower portion with a link (his link 25 and bracket 28), slotted so it can be unhooked. When the top is tilted back, the arm swings down to the ground and props it.

Materiais para este passo:

Barra chata de aço macioBarra chata de aço macio1 peça
Dobradiça de livroDobradiça de livro1 peça
Parafuso de carroçariaParafuso de carroçaria1 peça
Parafusos para madeiraParafusos para madeira1 peça

Ferramentas necessárias:

Serra de arco para metaisSerra de arco para metais
Engenho de furarEngenho de furar
Jogo de brocasJogo de brocas
Conjunto de chaves de fendasConjunto de chaves de fendas
7

Protect the entrance

Screw a strip of flat bar round the edge of the entrance, his iron band 31, where a chained dog wears it.

Materiais para este passo:

Barra chata de aço macioBarra chata de aço macio1 peça
Parafusos para madeiraParafusos para madeira1 peça

Ferramentas necessárias:

Serra de arco para metaisSerra de arco para metais
Engenho de furarEngenho de furar
Jogo de brocasJogo de brocas
Conjunto de chaves de fendasConjunto de chaves de fendas
8

Troubleshooting

Kennel troubleshooting.

Flow

Loading...
9

History and honest limits

**John S. Minion** of Newark, US 920,975, dated 11 May 1909, filed 21 May 1908. He claimed "a kennel comprising a bottom portion having vertical sides, a top portion with vertical sides resting on the sides of the bottom portion, hinges connecting the sides of the bottom and top portions on one end, an arm swinging from its top end on the hinged end of the top portion, and a link pivoted to the bottom portion and to the arm". He gives no sizes; the pine, all sizes and the flat-bar and bolt fittings are ours.

Materiais

6

Ferramentas necessárias

9

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...