ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL

Building a Morin Khuur — The Mongolian Horse-Head Fiddle
Build a morin khuur: Mongolia's upright two-string bowed fiddle, crowned with a carved horse's head. Its two strings and its bow are all made of horsehair, over a hide-faced box, with no fingerboard — you stop the strings from the side and slide like a horse's whinny. A serious maker build in the bowed string and the horsehair voice of the steppe.
Intermediário
Several hours over a few sessions
Instruções
1
1
The voice of the steppe
The voice of the steppe
The morin khuur is Mongolia's horse-head fiddle: an upright two-string bowed fiddle whose strings and bow are all horsehair, over a hide-faced box, topped with a carved horse's head.
2
2
Build the sound-box
Build the sound-box
Build a trapezoidal wooden box, a little wider at the bottom than the top, for the sound-body. Leave the front open to take the skin.
Materiais para este passo:
Baltic Birch Plywood (1/8 inch, 12x12, 10-Pack)1 peça
PVA Wood Glue1 peçaFerramentas necessárias:
Hacksaw3
3
Face the front with hide
Face the front with hide
Soak rawhide and stretch it drum-tight over the open front of the box, glue and lash it, and let it dry hard. This skin radiates the sound like a drumhead. (A thin wooden soundboard also works.)
Materiais para este passo:
Rawhide1 peça
PVA Wood Glue1 peça4
4
Fit the neck
Fit the neck
Fix a long neck rising straight up from the top of the box, tall enough to hold the strings clear of the skin.
Materiais para este passo:
Dowel Rod1 peça
PVA Wood Glue1 peça5
5
Carve the horse's head
Carve the horse's head
Carve a horse's head at the very top of the neck. This emblem gives the instrument its name and, the herders say, its spirit.
Ferramentas necessárias:
Sloyd Carving Knife6
6
Fit two tuning pegs
Fit two tuning pegs
Bore two holes in the neck just below the head and fit a friction tuning peg into each.
Materiais para este passo:
Tuning Pegs2 peçasFerramentas necessárias:
Awl7
7
Twist the horsehair strings
Twist the horsehair strings
Each string is a whole BUNDLE of horsehair twisted together — a thicker bundle of about 130 hairs for the low string, a thinner one of about 105 for the high string.
Materiais para este passo:
Bow Hair (Horsehair)1 peça8
8
String it over a bridge
String it over a bridge
Carve a small bridge and stand it on the middle of the hide. Tie each horsehair string at the base, run it up over the bridge, and wind it onto a peg.
Ferramentas necessárias:
Sloyd Carving Knife9
9
Tune the two strings
Tune the two strings
Tune the two strings a fourth or a fifth apart. Twist the pegs slowly — horsehair strings stretch, so give them time to settle.
10
10
Make the bow
Make the bow
String a springy stick with a ribbon of horsehair to make the bow, and rub it well with pine rosin so it grips.
Materiais para este passo:
Curved Branch (Bow)1 peça
Bow Hair (Horsehair)1 peça11
11
Bow and side-stop
Bow and side-stop
Hold the fiddle upright on your lap and draw the bow across a string. There is no fingerboard: stop the strings from the SIDE with your fingertips and nails, sliding to bend the note.
12
12
Make it whinny
Make it whinny
Slide smoothly between notes and let the horsehair-on-horsehair rasp sing. The morin khuur is famous for imitating a horse's neigh and carrying Mongolian long-song.
13
13
Compendium — horsehair, hide and the steppe
Compendium — horsehair, hide and the steppe
The morin khuur is a bowed fiddle, so it sings by the same stick-slip friction as the erhu and the violin: the rosined bow grabs a string, drags it until its tension tears it free, and the string snaps back to be caught again hundreds of times a second — the Helmholtz motion that keeps a bowed note singing for as long as you draw the bow. But almost everything about this fiddle is made of horse. Its two strings are not gut or metal but whole bundles of horsehair twisted together — roughly 130 hairs for the thick 'male' string and 105 for the thin 'female' one — and the bow is horsehair too, so hair bows against hair, giving the morin khuur its soft, breathy, whinnying tone. The sound-box is traditionally faced with stretched hide that radiates the strings' vibration like a drumhead, though many modern makers now use a thin wooden soundboard. And there is no fingerboard: the player stops the strings from the side, with fingertips and nails, so the pitch slides smoothly — which is why the morin khuur can imitate a horse's neigh and carry the long, gliding notes of Mongolian long-song and throat-singing. Its close cousin is the Chinese erhu, and its wider family is the spike-fiddles of the whole Eurasian steppe. Named for the carved horse's head that crowns it, the morin khuur is a national emblem of Mongolia, recognised by UNESCO as a masterpiece of humanity's living heritage.
Materiais
7- Referência
- 3 peçasReferência
- 2 peçasReferência
- 2 peçasReferência
- 1 peçaReferência
Blueprints relacionados
Estes blueprints compartilham conhecimento — técnicas, materiais ou princípios
CC0 Domínio Público
Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.
Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

