ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Oak Tanbark Peeled in Spring, Dried and Ground
Woody

Criado por

Woody

17. outubro 2026NO
13
0
0
0
0

Oak Tanbark Peeled in Spring, Dried and Ground

Oak bark is the tanner's bark of Europe. It was peeled from coppiced oaks 15 to 30 years old in May and June, when the rising sap lets it come away, dried, and ground to a coarse powder for the tan pit. The picture: peeling a coppice oak with the bark spoon (Alwin Geimer, CC BY-SA 3.0).
Iniciante
A day to peel, weeks to dry

Instruções

1

Cut in sap time

In May or June, once the sap has begun to rise, cut the lower branches off a coppice oak stem and ring the bark at about head height.

Materiais para este passo:

Varas de carvalho de talhadiaVaras de carvalho de talhadia1 peça

Ferramentas necessárias:

MachadoMachado
Luvas de trabalho em couroLuvas de trabalho em couro
2

Slit and peel

Slit the bark lengthwise two or three times with a short knife, then lever it off in long strips with the bark spud. Fell the stem and peel the rest. Beat thin branches with a hammer on a stone to loosen their bark.

Ferramentas necessárias:

FacaFaca
Descascador de páDescascador de pá
MachadoMachado
MarteloMartelo
Laje de pedra planaLaje de pedra plana
Luvas de trabalho em couroLuvas de trabalho em couro
3

Dry

Stand the strips to dry in the wood for some days, then bring them home and finish drying under cover. Tie the dry bark in bundles. This is dried oak bark.

Ferramentas necessárias:

Lona impermeávelLona impermeável
Fio para atar molhosFio para atar molhos
4

Grind

Chop the dry bark small with the hatchet on a block, then pound it with the mallet on a stone to a coarse powder (a bark mill does this at scale). Keep it dry in sacks.

Ferramentas necessárias:

MachadinhaMachadinha
Maço de madeiraMaço de madeira
Laje de pedra planaLaje de pedra plana
Saco de jutaSaco de juta
Luvas de trabalho em couroLuvas de trabalho em couro
5

Bark for your hides

A carregar o notebook Jupyter…

Materiais

1

Ferramentas necessárias

11

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...