Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Oil Bath: a Metal Jacket of Dried Oil with a Thermometer (Morfit, 1849)
Charlie

Criado por

Charlie

7. novembro 2026DE
7
0
0
0
0

Oil Bath: a Metal Jacket of Dried Oil with a Thermometer (Morfit, 1849)

A bath of hot oil that heats a flask, dish or retort evenly at temperatures above the boiling point of water. Campbell Morfit (1849) builds it exactly like his water-bath: a metal (or porcelain-lined) vessel holding the oil, with the vessel to be heated set in it, and a thermometer in the oil to read and regulate the heat. He gives up to 570 °F (about 300 °C). The oil is first heated for several hours in an iron capsule to drive out its moisture. Which oil, and the vessel sizes, are not given. Source: C. Morfit, Chemical and Pharmaceutic Manipulations (1849), pp. 182-185. Picture: his water-bath, Fig. 150.
Iniciante
Several hours (drying the oil)

Instruções

1

Read Morfit

"The oil should, before its transfer to the bath, be heated in an iron capsule for several hours, to expel moisture. The bath consists of a porcelain lined or metallic jacket, of construction exactly similar to that of the water-bath. It affords a temperature of 570° F., and the facility of determining its temperature, for which purpose a thermometer is a necessary accompaniment."
2

Dry the oil

Heat the oil in an iron capsule for several hours to drive off its moisture. Do not heat it so far that it decomposes. Which oil is not given (unknown). Ours: a shallow metal pan for the iron capsule.

Materiais para este passo:

Material desconhecidoMaterial desconhecido1 oil

Ferramentas necessárias:

Tabuleiro metálico pouco fundoTabuleiro metálico pouco fundo
Forno de carvão vegetalForno de carvão vegetal
TermómetroTermómetro
3

Set up the jacket

Take a metal vessel wide enough that the vessel to be heated sits inside with space at the bottom and sides (Fig. 150: the outer vessel A carries an inner flange a on which the dish B rests). Pour in the dried oil, set the thermometer in the oil, and heat on a charcoal furnace or gas stove. Sizes are not given (unknown). Ours: a metal pot.

Materiais para este passo:

PanelaPanela1 peça

Ferramentas necessárias:

TermómetroTermómetro
Forno de carvão vegetalForno de carvão vegetal
Dimensões desconhecidasDimensões desconhecidas
4

Use it

Set the flask, dish or retort in the oil and regulate the fire by the thermometer. Oil loses less by evaporation than water and gives temperatures above 100 °C, up to 570 °F (about 300 °C). Boiling oil throws off a very disagreeable vapour; keep the heat below the point where the oil decomposes.

Ferramentas necessárias:

TermómetroTermómetro
Forno de carvão vegetalForno de carvão vegetal

Materiais

2

Ferramentas necessárias

4

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...