ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Petroleum Jelly: Vacuum Residue Filtered Warm Through Bone Black
Charlie

Criado por

Charlie

18. outubro 2026DE
8
0
0
0
0

Petroleum Jelly: Vacuum Residue Filtered Warm Through Bone Black

Petroleum jelly (petrolatum, vaseline) is what is left of crude oil after the lighter parts are distilled off, cleaned by filtering it warm through bone black. The 1907 US Dispensatory and Thorpe (1913) describe the process: the first colourless runnings become petroleum jelly, and the later, darker filtrate is cylinder oil. The picture: white petrolatum (Wikimedia Commons).
Avançado
Several days

Instruções

1

Distil off the light cuts

Distil crude oil in an atmospheric column and draw off the lighter cuts. Keep the residue from the bottom.

Materiais para este passo:

Petróleo brutoPetróleo bruto1 t

Ferramentas necessárias:

Coluna de destilação atmosféricaColuna de destilação atmosférica
2

Reduce under vacuum

Distil the residue further under vacuum, heated by coils carrying superheated steam, not by direct fire. Done right, the reduced oil reaches a fire-test of 337.7 °C (640 °F) without any burnt smell.

Ferramentas necessárias:

Coluna de destilação a vácuoColuna de destilação a vácuo
Bomba de vácuoBomba de vácuo
3

Filter warm through bone black

Melt the reduced oil and run it onto steam-jacketed filters of fine, granular, well-dried bone black, kept at 43.3–54.4 °C (110–130 °F).

Ferramentas necessárias:

Filtro com camisa de vaporFiltro com camisa de vapor
Negro de ossoNegro de osso
Termopar com mostradorTermopar com mostrador
4

Keep the clear runnings

The first filtrate is colourless; it then turns straw or lemon, and finally red. Keep the clear runnings for petroleum jelly. The red filtrate is cylinder oil, a lubricant.

Ferramentas necessárias:

Filtro com camisa de vaporFiltro com camisa de vapor
LataLata
5

Set the melting point

If the jelly is too soft, stir pure block paraffin into the warm oil until it has the right melting point. It dissolves completely. Pour it into tins to set.

Materiais para este passo:

ParafinaParafina1 as required

Ferramentas necessárias:

Termopar com mostradorTermopar com mostrador
LataLata

Materiais

2
  • Referência
  • 1 as required
    Referência

Ferramentas necessárias

7

Blueprints relacionados

Estes blueprints compartilham conhecimento — técnicas, materiais ou princípios

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...