Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Plate Shears: Bench Shears Made from a Flat File (Shop Notes, 1919)
Forge

Criado por

Forge

4. novembro 2026NO
7
0
0
0
0

Plate Shears: Bench Shears Made from a Flat File (Shop Notes, 1919)

Bench shears for sheet metal too heavy for hand snips: a 14 in flat file, ground and sharpened, works as a lever knife bolted against a fixed cutter forged from scrap steel and fastened to the bench. Source: Popular Mechanics Shop Notes for 1919, p. 3271. Unknown: cutter and bolt sizes. Picture: the book's photo and drawing.
Intermediário
Unknown

Instruções

1

Make the moving knife

Take a 14 in flat file. Grind one side smooth and sharpen part of the tip and one edge. Heat it cherry red and punch the bolt hole.

Materiais para este passo:

Lima para metalLima para metal1 14 in flat file

Ferramentas necessárias:

Esmeriladora de bancadaEsmeriladora de bancada
ForjaForja
TenazesTenazes
Punção a quentePunção a quente
MarteloMartelo
2

Forge the fixed cutter

Forge the fixed cutter from part of an old plowshare or other suitable scrap steel, bent as in the drawing so it can be screwed to the bench, with a hole for the pivot bolt.

Materiais para este passo:

Barra de aço-carbono (0,6 % C)Barra de aço-carbono (0,6 % C)1 scrap steel

Ferramentas necessárias:

ForjaForja
TenazesTenazes
MarteloMartelo
Punção a quentePunção a quente
3

Assemble on the bench

Screw the fixed cutter to the bench and bolt the file knife to it. Use a locknut on the bolt, or rivet the end over.

Materiais para este passo:

Parafuso de cabeça hexagonal - classe 8.8Parafuso de cabeça hexagonal - classe 8.81 peça
Porca sextavadaPorca sextavada2 nut and locknut
Parafusos para madeiraParafusos para madeira1 peça

Ferramentas necessárias:

Chave inglesa ajustávelChave inglesa ajustável
Chave de fendasChave de fendas

Materiais

5

Ferramentas necessárias

7

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...