Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Rivet Set from a Strip of Heavy Tin (Boy Mechanic, 1915)
Hyde

Criado por

Hyde

14. novembro 2026AR
9
0
0
0
0

Rivet Set from a Strip of Heavy Tin (Boy Mechanic, 1915)

An emergency rivet set for leatherwork: a 3/4 in strip of heavy tin, rolled tight at one end to drive the washer down, and notched at the other end to hold the washer over the rivet while the first blows are struck.
Iniciante
Half an hour

Instruções

1

Read the Boy Mechanic

"Desiring to rivet some pieces of leather together and having no rivet set, I hastily made one from a strip of heavy sheet tin."
2

Cut the strip

Cut a strip of heavy sheet tin 3/4 in wide (a few inches long is ours).

Materiais para este passo:

Chapa de folha de flandresChapa de folha de flandres1 peça

Ferramentas necessárias:

Tesoura de chapaTesoura de chapa
Limas (lima de mão)Limas (lima de mão)
3

Roll one end

Roll one end of the strip up tightly into a solid roll, as in the sketch. This end sets the washer.

Ferramentas necessárias:

Alicate de bico chatoAlicate de bico chato
4

Notch the other end

Cut a notch in the other end just wide enough to fit over the rivet's shank.

Ferramentas necessárias:

Tesoura de chapaTesoura de chapa
Limas (lima de mão)Limas (lima de mão)
5

Use it

Put the rivet through the leather and the washer on it. Hold the washer down with the notched end and strike the first hammer blows, then turn the tool and finish with the rolled end.

Materiais para este passo:

Rebites de cobreRebites de cobre1 peça

Ferramentas necessárias:

MarteloMartelo
6

Troubleshooting

Tin rivet set troubleshooting.

Flow

Loading...
7

History and honest limits

From **The Boy Mechanic, Book 2** (Popular Mechanics, 1915), p. 457 (checked on the archive.org scan boymechanicbook200chic2). The strip length and tools are ours.

Materiais

2

Ferramentas necessárias

4

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...