Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL

Sagger: a Fireclay Box Moulded Round a Wooden Mould (Bourry, 1911)
The kiln box that shields ware from flame and soot: a fireclay-and-grog slab beaten flat, rolled round a wooden mould for the wall, joined to a slab bottom by hand, then dried and burned. Saggers stack in piles with wads of soft fireclay between.
Usually oval, sometimes square or rectangular; size to suit the ware.
Source: Emile Bourry, A Treatise on Ceramic Industries (1911), pp. 233, 352-356. Unknown: proportions, sizes, firing temperature. Picture: Fig. 173 of the book.
Intermediário
Unknown
Instruções
1
1
Make the body
Make the body
Mix fireclay with as much grog as possible, of fairly coarse grain, coarse and fine together, into a firm body. Not given: proportions.
Materiais para este passo:
Argila refratária1 peça
Chamote (louça cozida moída)1 peça
Água1 peçaFerramentas necessárias:
Pá de madeira2
2
Beat out the slabs
Beat out the slabs
Dust a table with grog and fix four rules on it as thick as the slab. Mould slabs of the body by hand between them, firm enough to be shaped roughly by striking with a wooden bat, then smooth them.
Ferramentas necessárias:
Chamote (louça cozida moída)
Material desconhecido
Pá de madeira
Rolo da massa3
3
Form the sagger
Form the sagger
Roll a slab round a wooden mould whose outside is the inside shape of the sagger. Stand the mould on a second slab for the bottom and join the two by hand. Strike the body so it lengthens slightly and comes loose, and draw the mould off upward.
Ferramentas necessárias:
Material desconhecido
Pá de madeira4
4
Dry and burn
Dry and burn
Dry it slowly, then burn it as fireclay goods are burned. In use, stack saggers in piles with wads of thin fireclay between them to seal and steady them.
Ferramentas necessárias:
Forno cerâmicoMateriais
3- 1 peçaReferência
- Referência
- 1 peçaReferência
Ferramentas necessárias
5- Referência
- Referência
- Referência
- Referência
- Referência
Materiais de Blueprints conectados
Este projeto faz
CC0 Domínio Público
Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.
Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

