Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL

Saw Set: a Bevelled Iron Block (Shop Notes, 1909)
A home-made saw set: a foot of T-rail, or any iron about 2 in square, with one end filed to a small bevel and a gauge mark on it. Lay the saw teeth to the mark and strike each tooth with a light hammer to bend it over the bevel.
The mark as given sets a saw for soft wood; draw the saw back a trifle for hard wood.
Source: Popular Mechanics Shop Notes for 1909, p. 896 (N. J. McLean). Picture: the article's drawing.
Iniciante
Unknown
Instruções
1
1
File the bevel
File the bevel
Take a piece of T-rail about 1 ft long, or any piece of iron about 2 in square. With a file, bevel one end on top, 1/8 in down by 5/8 in back.
Materiais para este passo:
Barras de ferro1 about 1 ft long, about 2 in squareFerramentas necessárias:
Lima para metal2
2
Mark the gauge line
Mark the gauge line
On the bevel make a gauge mark 3/16 in down from the top of the bevel (Fig. 1). This mark is for soft wood such as white pine and hemlock.
Ferramentas necessárias:
Lima para metal3
3
Set the teeth
Set the teeth
Lay the saw on the flat top of the iron with the points of the teeth to the gauge mark. Strike each tooth one smart blow, or two light blows, with a light hammer with a small face; a horseshoeing hammer works well (Fig. 2). For hard wood, draw the saw back a trifle from the mark.
Ferramentas necessárias:
Martelo pequeno
SerroteMateriais
1- 1 about 1 ft long, about 2 in squareReferência
Este projeto faz
CC0 Domínio Público
Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.
Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.
