Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL

Self-Healing Cutting Mat: Cork Pinning Side and PVC Cutting Side, Tri-Fold (Carnegie, US 11,077,575)
A self-healing cutting mat has a PVC face that closes up again after a rotary cutter runs over it. L. V. Carnegie (US 11,077,575, 2021) glues a cork layer to the back of the PVC layer, so the same board takes straight pins on one side and cutting on the other, and scores it so it folds in three for storage.
Which PVC heals is not given: Carnegie only says PVC mats are self-healing.
Source: L. V. Carnegie, US Patent 11,077,575 (filed 2018, granted 2021). Picture: its Figs. 1 and 3.
Iniciante
Unknown
Instruções
1
1
Read Carnegie
Read Carnegie
"Polyvinyl chloride (PVC) mats provide a rigid, self-healing surface on which a rotary cutter may be used ... Fabrics and crafts cannot be pinned directly to PVC mats".
2
2
Cut the two layers
Cut the two layers
Cut a PVC sheet and a cork sheet to the same size. Carnegie: each layer 1/8 to 1/2 in. thick (cork 1/4 to 1/2 in.); one mat is 72 in. long by 40 in. wide, but any size will do. The PVC grade that self-heals is not given.
Materiais para este passo:
Placa de PVC1 cutting layer, self-healing grade not given
Placa de cortiça1 pinning layerFerramentas necessárias:
X-ato de oficina
Régua de traçar
Fita métrica
Dimensões desconhecidas3
3
Glue them back to back
Glue them back to back
Glue the cork to the back of the PVC so the cork face takes pins and the PVC face takes the cutter. Carnegie allows glue, screws, rivets, magnets or a case; the glue is not given.
Materiais para este passo:
Material desconhecido1 glue, not givenFerramentas necessárias:
Rolo de laminação4
4
Score the folds and mark the grid
Score the folds and mark the grid
Score two lines across the full width, partly or fully through the layers, so the mat folds into three panels with its faces inward. Print measured grid lines on either face, or stick on a printed paper grid. How deep to score is not given.
Ferramentas necessárias:
X-ato de oficina
Régua de traçar5
5
Use it
Use it
Unfold the mat flat. Pin fabric and paper patterns to the cork side; turn it over and cut on the PVC side with a rotary cutter. Fold it up for storage.
Materiais
3- 1 cutting layer, self-healing grade not givenReferência
- 1 pinning layerReferência
- 1 glue, not givenReferência
Ferramentas necessárias
5- Referência
- Referência
- 1 vendor sell this, none ship to you yetReferência
- Referência
- Referência
Este projeto faz
CC0 Domínio Público
Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.
Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.
