ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Steel Needle: Pointed, Eyed, Hardened in Oil and Tempered
Forge

Criado por

Forge

18. outubro 2026NO
20
0
0
0
0

Steel Needle: Pointed, Eyed, Hardened in Oil and Tempered

Needles are made from good steel wire: cut, straightened, pointed, flattened and pierced for the eye, hardened by heating and plunging into oil, then tempered back to a springy hardness, scoured and polished (Bucknall Smith, A Treatise upon Wire, 1891). This is the same sequence by hand, one heavy needle at a time from piano wire; the hand methods and sizes are ours. The picture: steel sewing needles (Wikimedia Commons).
Intermediário
Half a day

Instruções

1

Cut, soften and straighten

Cut 70 mm of 1.2 mm piano wire. Heat it to red in the forge and let it cool slowly in the ashes so it can be filed and drilled, then roll it straight on the anvil.

Materiais para este passo:

Corda de pianoCorda de piano70 mm

Ferramentas necessárias:

Alicate de corteAlicate de corte
Forja de ferreiroForja de ferreiro
Alicate de bico finoAlicate de bico fino
BigornaBigorna
2

Point

Clamp it in the vise and file a long, even taper to a sharp point, turning the wire as you go.

Ferramentas necessárias:

Jogo de limasJogo de limas
Torno de bancadaTorno de bancada
Óculos de segurançaÓculos de segurança
3

Flatten and pierce the eye

Flatten the head end slightly on the anvil, drill the eye through the flat with the finest bit, then file off the burrs and round the head.

Ferramentas necessárias:

BigornaBigorna
Martelo de pena transversalMartelo de pena transversal
Berbequim de mãoBerbequim de mão
Jogo de limasJogo de limas
Torno de bancadaTorno de bancada
Óculos de segurançaÓculos de segurança
4

Harden in oil

Heat the needle evenly to red and plunge it into the oil. It is now glass-hard and brittle.

Ferramentas necessárias:

Forja de ferreiroForja de ferreiro
Alicate de bico finoAlicate de bico fino
Tina de têmpera com óleoTina de têmpera com óleo
Óculos de segurançaÓculos de segurança
5

Temper

Reheat it in the oven to about 600 °F (315 °C) and let it cool slowly to a springy temper. If it came out crooked, straighten it with light blows of a small hammer on the anvil.

Ferramentas necessárias:

Forno de tratamento térmicoForno de tratamento térmico
Termopar com mostradorTermopar com mostrador
BigornaBigorna
Martelo de pena transversalMartelo de pena transversal
6

Scour and polish

Scour it bright with emery cloth, a little oil and soap. Wash it in hot water, dry it in sawdust, touch up the point, and polish it on the leather strop.

Ferramentas necessárias:

Pano de esmerilPano de esmeril
AzeiteAzeite
SabãoSabão
SerraduraSerradura
Assentador de couroAssentador de couro
Jogo de limasJogo de limas

Materiais

1

Ferramentas necessárias

17

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...