Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Steel Skelp: Ingot to Bloom to Continuous Skelp Mill (National Tube Co., 1921)
Forge

Criado por

Forge

4. novembro 2026NO
8
0
0
1
0

Steel Skelp: Ingot to Bloom to Continuous Skelp Mill (National Tube Co., 1921)

Skelp, the steel strip that welded pipe is made from, as National Tube rolled it in 1921: steel ingots are soaked to an even heat, rolled into blooms and sheared hot to length, then reheated and rolled in a continuous mill into long strips sized for one pipe each. For butt-weld pipe the edges are bevelled slightly and one end is trimmed to a point so the welding tongs can start it through the bell. Unknown: the skelp sizes for each pipe; the 'Spellerizing' roll treatment is named but not described. Source: National Tube Co., "National" Modern Welded Pipe (1921), pp. 38-40. Picture: the continuous skelp mill.
Avançado
Unknown

Instruções

1

Soak the ingots

Strip the moulds from the ingots while they are still hot, then set them in a soaking pit and heat them evenly right through to rolling heat. Lift them out with large tongs.

Materiais para este passo:

Lingote de açoLingote de aço1 peça

Ferramentas necessárias:

Forno-poçoForno-poço
Tenaz de forjaTenaz de forja
2

Roll into blooms

Roll each ingot out longer in the bloom mill, then shear it hot into blooms or slabs of the size the pipe needs.

Ferramentas necessárias:

LaminadorLaminador
3

Roll the skelp

Reheat the blooms and roll them into long strips (skelp). In a continuous mill each bloom passes through several sets of rolls in one direction and comes out as finished skelp. Set the rolls to the length, width and thickness worked out for each size of pipe.

Materiais para este passo:

Dimensões desconhecidasDimensões desconhecidas1 peça

Ferramentas necessárias:

LaminadorLaminador
4

Finish for butt welding

Bevel the edges slightly, so the strip butts truly when it is drawn through the welding die. Trim one end of each piece roughly to a point and press it to shape, so the welding tongs can start it through the bell.

Ferramentas necessárias:

LaminadorLaminador
Tesoura de chapaTesoura de chapa

Materiais

2

Ferramentas necessárias

4

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...