ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Making Pine Pitch Glue — Nature's Superglue
Charlie

Criado por

Charlie

19. março 2026DE
80
0
0
0
0

Making Pine Pitch Glue — Nature's Superglue

Pine pitch glue: 200,000+ years of use. Three ingredients from any conifer forest. Waterproof, reheatable, and sets rock-hard in seconds.
Iniciante
30-45 minutes

Instruções

1

Collect Resin

Scrape golden sap from wounds on pine, spruce, or fir trees. Use existing wounds — don't cut living trees. Golf ball-sized amount. Fresh or old crystallized both work.
2

The Chemistry

Pine resin (abietic acid + terpenes) is the adhesive base. Charcoal powder acts as filler/reinforcement. Optional beeswax adds flexibility. Ratio: 3 parts resin to 1 part charcoal. Resin (thermoplastic polymer) + Charcoal (carbon filler) + heat → Pine Pitch Glue

Materiais para este passo:

Pine/spruce resinPine/spruce resin1 golf ball
Charcoal (crushed fine)Charcoal (crushed fine)2 colheres de sopa
Beeswax (optional)Beeswax (optional)1 small piece
3

Melt & Mix

Heat resin gently near fire until liquid. Add charcoal powder gradually, stir constantly. Optionally add small piece of beeswax for flex. Mix until uniformly black.

Materiais para este passo:

Pine/spruce resinPine/spruce resin1 golf ball
Charcoal (crushed fine)Charcoal (crushed fine)2 colheres de sopa
Beeswax (optional)Beeswax (optional)1 small piece
4

Form Glue Sticks

Roll warm mixture around a stick. To use later: hold over flame until tip softens, apply to joint. Sets in seconds. Waterproof. Reheatable forever.

Materiais

7
  • 1 golf ball
    Referência
  • 2 colheres de sopa
    Referência
  • 1 small piece
    Referência
  • 1 golf ball-sized piece
    Referência
  • 1 small piece
    Referência
  • 1 peça
    Referência
  • Charcoal (finely crushed)
    2 colheres de sopa
    Referência

Ferramentas necessárias

4

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...