Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Teaspoon Sawn Short from Silver Sheet, Then Hammered Out (Payne 1914)
Arthur F. Payne · Public domain (1914)
Forge

Criado por

Forge

27. outubro 2026NO
14
0
0
0
0

Teaspoon Sawn Short from Silver Sheet, Then Hammered Out (Payne 1914)

Saw the spoon out of flat silver smaller than it will end up: shorter, narrower in the bowl and thicker in the shank. Hammering then stretches it to full size. Arthur Payne said this method was used largely for silver teaspoons. Source: A. F. Payne, Art Metalwork with Inexpensive Equipment (1914), pp. 180–184; annealing from his chapter XI. The millimetre figure is ours. Picture: Payne's Fig. 155, the blank and the finished spoon.
Intermediário
1 day

Instruções

1

Saw out the short blank

Mark out and saw the blank from 15-gauge sterling silver (about 1.45 mm; our conversion): 5 in long, the bowl 1⅛ in wide and the shank 5⁄16 in wide. The finished spoon will be 6 in long with a bowl 1⅝ in wide.

Materiais para este passo:

Placa de prata de leiPlaca de prata de lei1 piece 15 gauge, enough for the 5 in blank

Ferramentas necessárias:

Ponta de traçarPonta de traçar
Serra de joalheiroSerra de joalheiro
2

Stretch the bowl wider

Hammer the bowl on a flat anvil with the ball-pein hammer, held at a slight angle towards the side you want it to grow. This makes the bowl thinner and wider.

Ferramentas necessárias:

BigornaBigorna
Martelo de bolaMartelo de bola
3

Narrow the shank with the neck hammer

Hold the spoon on edge on a rounded convex stake and hammer the shank narrower with the neck hammer. This lengthens the spoon and makes the shank narrower and thicker. Widen the tip of the handle the same way as the bowl.

Ferramentas necessárias:

EstacaEstaca
Martelo de pescoçoMartelo de pescoço
Martelo de bolaMartelo de bola
4

Anneal and repeat

When the silver gets hard, heat it to a dull red and plunge it into water, or let it cool. Repeat the hammering and annealing until the spoon is roughly to shape.

Materiais para este passo:

ÁguaÁgua1 as required

Ferramentas necessárias:

Bico de BunsenBico de Bunsen
TenazesTenazes
Recipiente de vidroRecipiente de vidro
5

File and planish

File the rough edges smooth, then planish the whole spoon carefully.

Ferramentas necessárias:

Limas (lima de mão)Limas (lima de mão)
Martelo de aplanarMartelo de aplanar
EstacaEstaca
6

Polish out the file marks

Rub out all the scratches and file marks with emery cloth.

Ferramentas necessárias:

Pano de esmerilPano de esmeril
7

Anneal to even the fire scale

Anneal the spoon thoroughly once more. Heated silver grows a thin white skin, the fire scale, and this brings it back over the spots where filing and polishing took it off, so the colour is even.

Materiais para este passo:

ÁguaÁgua1 as required

Ferramentas necessárias:

Bico de BunsenBico de Bunsen
TenazesTenazes
Recipiente de vidroRecipiente de vidro
8

Planish with smooth hammers

Planish the spoon on smooth tools with smooth, bright hammers. This makes it stiff again after the annealing.

Ferramentas necessárias:

Martelo de aplanarMartelo de aplanar
BigornaBigorna
EstacaEstaca
9

Final polish with rouge

Polish it lightly with a soft cotton flannel and a little red rouge.

Ferramentas necessárias:

Pano de polir joiasPano de polir joias
Vermelho de joalheiroVermelho de joalheiro

Materiais

2
  • 1 piece 15 gauge, enough for the 5 in blank
    Referência
  • 2 as required
    Referência

Ferramentas necessárias

14

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...