Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL

English
Test Tubes Made from Glass Tubing
Glass tubing is drawn continuously from molten glass and cut into lengths of about 1.5 m. A test tube is made from a length of it in the flame: turned until it softens, pulled apart to close one end, the closed end blown gently into a round bottom, and the open end heated and flared with a turnpin into a flange, which finishes the edge neatly and strengthens it so a cork can be pushed in without breaking it. Hard Bohemian glass was the usual test-tube glass in 1910.
Intermediário
Minutes per tube
Instruções
1
1
Heat and pull
Heat and pull
Heat a length of tubing while turning it until the glass runs together, then draw the two pieces apart.
Materiais para este passo:
Kit de tubos de vidro1 peçaFerramentas necessárias:
Bico de Bunsen2
2
Round the bottom
Round the bottom
Reheat the closed end and blow gently to make it round.
Ferramentas necessárias:
Bico de Bunsen3
3
Flange the mouth
Flange the mouth
Heat the open end and turn it out with a turnpin into a flange.
Ferramentas necessárias:
Bico de Bunsen
Alargador de vidro (turnpin)Materiais
1- 1 peçaReferência
Ferramentas necessárias
2- Referência
- Referência
Este projeto faz
CC0 Domínio Público
Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.
Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.


