Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Hand Files Cut With a Double-Edged Hammer and Tempered in Burnt Ox Horn and Salt (Theophilus, 12th Century)
Forge

Criado por

Forge

14. novembro 2026NO
8
0
0
0
0

Hand Files Cut With a Double-Edged Hammer and Tempered in Burnt Ox Horn and Salt (Theophilus, 12th Century)

How a medieval metalworker made his own files, from Theophilus's De Diversis Artibus (12th century): files of steel, or of soft iron faced with steel, forged to size, smoothed and cut with a double-edged hammer or cutting iron, then hardened by sprinkling them glowing with burnt ox horn and salt and quenching. Small soft-iron files are packed in lard, goatskin and clay instead.
Avançado
About 1 day per few files

Instruções

1

The hardening mix

A carregar o notebook Jupyter…
2

Read De Diversis Artibus, Book III

"Files are made from pure steel, large and moderately sized, triangular and round. Others also are made which are stronger in the middle, from soft iron inside, but outwardly they are covered with steel."
3

Forge and smooth the blanks

Beat steel (or soft iron covered with steel) to the size and shape wanted: large or moderate, triangular or round; for small files, square, round, triangular or thin. Smooth them on a planing instrument (a filing or scraping bed).

Materiais para este passo:

Barra de aço-carbono (0,6 % C)Barra de aço-carbono (0,6 % C)1 peça
Barra de ferro forjadoBarra de ferro forjado1 peça

Ferramentas necessárias:

ForjaForja
FoleFole
BigornaBigorna
MarteloMartelo
Tenaz de forjaTenaz de forja
Limas (lima de mão)Limas (lima de mão)
4

Cut the teeth

Mark out the teeth with a hammer sharp on both sides, or with the cutting iron, until the file is cut all over.

Ferramentas necessárias:

MarteloMartelo
Talhadeira de picar limasTalhadeira de picar limas
BigornaBigorna
Torno de bancadaTorno de bancada
5

Temper with horn and salt

Burn an ox horn in the fire, scrape it, mix it with a third part of salt and grind it hard. Heat the file until it glows, sprinkle the mixture over it everywhere, lay hot coals on and blow quickly over the whole without letting the coating fall off; then draw it out and quench it evenly in water, and dry it slightly over the fire. He tempers all steel things this way.

Materiais para este passo:

Chifre de bovinoChifre de bovino1 peça
SalSal1 peça

Ferramentas necessárias:

ForjaForja
FoleFole
PipetaPipeta
Tenaz de forjaTenaz de forja
Balde de têmperaBalde de têmpera
6

Or pack small soft-iron files

For small soft-iron files, after cutting, anoint them with the grease of an old hog, bind them with small straps of buck-goat skin tied with flaxen thread, and cover each with beaten clay, leaving the handles (tangs) bare. Dry them, put them in the fire and blow strongly until the skin is burned, take them quickly out of the clay, quench evenly in water, and dry them at the fire.

Materiais para este passo:

Gordura de porco (banha dos rins e toucinho do lombo)Gordura de porco (banha dos rins e toucinho do lombo)1 peça
Couro de cabraCouro de cabra1 peça
Fio de linhoFio de linho1 peça
ArgilaArgila1 peça

Ferramentas necessárias:

ForjaForja
FoleFole
Tenaz de forjaTenaz de forja
Balde de têmperaBalde de têmpera
Faca para couroFaca para couro
7

Troubleshooting

File troubleshooting.

Flow

Loading...
8

History and honest limits

From Theophilus Presbyter, **De Diversis Artibus** (12th century), Book III, chapters XVII-XIX, translated by Robert Hendrie (1847) (checked on the archive.org scan essayuponvarious00hend, pp. 223-225). He gives no sizes, temperatures or tooth spacing. The tools and the case-hardening explanation are ours.

Materiais

8

Ferramentas necessárias

11

Blueprints relacionados

Estes blueprints compartilham conhecimento — técnicas, materiais ou princípios

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...