Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL

Thimble: the Pitted Iron Thimble Gilt Inside (Rouy and Berthier, Ure 1839)
The Paris method of Rouy and Berthier: thin sheet-iron discs, red-hot, punched step by step into a cup through five ever-deeper hollows, then turned, pitted and annealed on the lathe, gilt inside with gold leaf pressed on by a steel mandril, and banded outside with a gold fillet.
Variable: closed (pitted round end) or open (no end, for tailors).
Source: Andrew Ure, Dictionary of Arts, Manufactures and Mines (1839), 'Thimble'. Picture: a modern pitted thimble (Commons, CC BY-SA 3.0).
Avançado
Unknown
Instruções
1
1
Punch the blanks
Punch the blanks
Cut sheet iron 1/24 in thick into strips sized for the thimbles. Run them under a punch press to cut discs about 2 in across, left joined by a tail, a dozen to a strip.
Materiais para este passo:
Chapa de ferro (martelada)1 1/24 inFerramentas necessárias:
Prensa de puncionar2
2
Sink the cup
Sink the cup
Heat the blanks red-hot and lay each on a mandril fitted to its size. Strike the middle with a round-faced punch about as thick as a finger to sink it into the first hollow, then drive it through a block with five hollows of increasing depth until it has the thimble's shape.
Ferramentas necessárias:
Forja
Tenazes
Metal desconhecido
Martelo3
3
Turn and pit on the lathe
Turn and pit on the lathe
Chuck the rough thimble in the lathe, polish the inside, turn the outside, mark the rings for the gold band, and press in the rows of pits with a milling tool.
Ferramentas necessárias:
Torno mecânico
Ferramenta de recartilhar4
4
Anneal, gild and band
Anneal, gild and band
Anneal and brighten the thimbles. Line each inside with a thin cone of gold leaf, bonded to the iron by the hard pressure of a smooth steel mandril. Turn an annular seat outside, lay a gold fillet in it and press its edges into a fine groove cut on the lathe.
Materiais para este passo:
Folha de ouro1 lining
Metal desconhecido1 gold filletFerramentas necessárias:
Forja
Barra mandril
Torno mecânicoMateriais
3- 1 1/24 inReferência
- 1 liningReferência
- 1 gold filletReferência
Este projeto faz
CC0 Domínio Público
Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.
Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.
