Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Tweezers: Bent from a Thin Steel Strip (Cassell's, 1900)
Forge

Criado por

Forge

4. novembro 2026NO
11
0
0
0
0

Tweezers: Bent from a Thin Steel Strip (Cassell's, 1900)

Fine tweezers from a single strip of thin sheet steel, bent double so the spring of the bend holds the tips apart. Cassell's gives them for handling dead insects by the thorax. Variable: strip 3/8 or 1/2 in wide, 6 or 8 in long. Source: Cassell's Cyclopaedia of Mechanics (1900), p. 72. Picture: drawn by Youblob from the text.
Iniciante
Unknown

Instruções

1

Cut the strip

Cut a strip of thin sheet steel 3/8 or 1/2 in wide and 6 or 8 in long.

Materiais para este passo:

Fita de aço (aço de mola, fina)Fita de aço (aço de mola, fina)1 strip

Ferramentas necessárias:

Tesoura de chapaTesoura de chapa
2

Bend it double

Bend the strip double at the middle until the two ends meet. Ease the bend so that its spring holds the ends about 3/4 to 1 in apart when free.

Ferramentas necessárias:

Torno de bancadaTorno de bancada
MarteloMartelo
3

Point the ends

File the two ends to a blunt point.

Ferramentas necessárias:

Lima para metalLima para metal

Materiais

1

Ferramentas necessárias

4

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...