ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Twin-Plunger Air-Chamber Churn: Two Plungers Throw the Cream Through a Middle Chamber
Andrews made the cream do the travelling, back and forth through a middle chamber.
John Andrews of Middlesex County, Massachusetts, received US 7,298, dated 23 April 1850, for a churn box divided by two vertical partitions into three apartments, with a series of holes "at or near its bottom" in each partition, "unprovided with valves." Each outer chamber has a plunger on a rod jointed to a brake, "one of the said plungers being elevated while the other is being depressed," so the cream is thrown "back and forth in several streams through the air chamber." Holes near the partitions' tops let air in under each rising plunger.
This rung works out the streams, then prints the partitions and plungers, builds the box and brake, and makes butter.
Intermediário
About 5 hours, plus printing
Instruções
1
1
The streams
The streams
A carregar o notebook Jupyter…
2
2
Two dashers worked oppositely by one lever before it
Two dashers worked oppositely by one lever before it
The embedded blueprint works two dashers in one churn from a lever. Andrews puts each plunger in its own chamber so the cream must flow between them.
3
3
Read US 7,298
Read US 7,298
"Through each of the partitions a, b, and near the upper part thereof, I make one or more holes d, d, d, &c., as seen in Figs. 2 and 3, they being so arranged that the plunger F or F', during its upward stroke, shall pass partially or wholly above them, and in order to allow air to rush through said hole or holes and into the space directly under the plunger. The descent of the plunger forces such air into and through the cream."
4
4
Print the parts
Print the parts
Print two partitions (/uploads/blueprints/twin-plunger-air-chamber-churn-partition.stl) with their foot holes and air holes, two plungers (/uploads/blueprints/twin-plunger-air-chamber-churn-plunger.stl) and the brake hub (/uploads/blueprints/twin-plunger-air-chamber-churn-brake-hub.stl). Print in PETG at 0.2 mm layers, 30 % infill, 4 walls; wash before first use.
Materiais para este passo:
Filamento PETG1 peçaFerramentas necessárias:
Impressora 3D de filamento (FDM)5
5
The box
The box
Take a food-safe box about 230 × 120 × 160 mm. Glue the two partitions across it in silicone, dividing it into three equal chambers.
Materiais para este passo:
Recipiente de armazenamento de grau alimentar1 peça
Vedante de silicone1 peçaFerramentas necessárias:
Grampos
Fita métrica6
6
Plungers and brake
Plungers and brake
Glue a 12 mm hardwood dowel rod in each plunger. Screw two pine standards to the box's middle, pass a dowel through them as the rocker shaft, and fix a pine brake across it with the hub. Join each rod to an end of the brake on a loose screw, so one plunger rises as the other falls.
Materiais para este passo:
Cavilhas de madeira dura1 peça
Tábua de pinho1 peça
Parafusos de máquina1 peça
Porca sextavada1 peça
Cola de madeira1 peça
Parafuso para madeira n.º 8 x 1"1 peçaFerramentas necessárias:
Serrote
Berbequim sem fios
Jogo de brocas
Conjunto de chaves de fendas7
7
The patent drawing
The patent drawing
US 7,298 drawing sheet, public domain (expired patent).
8
8
Rock the brake and make butter
Rock the brake and make butter
Let the heavy cream stand until it reaches about 15 °C, checked with the thermometer. Pour in 1.5 litres, below the top holes. Rock the brake steadily up and down; time until the butter comes. Pour off the buttermilk, add cold water, churn a little and pour off again until it runs clear; work in a pinch of salt and weigh the butter.
Materiais para este passo:
Natas para bater1500 ml
Sal marinho grosso1 peça
Água1 peçaFerramentas necessárias:
Termómetro de sonda permanente
Cronómetro
Balança digital de cozinha
Taça grande de aço inoxidável9
9
Plungers that stick, cream over the top
Plungers that stick, cream over the top
Twin-plunger air-chamber churn troubleshooting.
Flow
Loading...
10
10
History and honest limits
History and honest limits
**John Andrews** of Middlesex County, Massachusetts, received US 7,298, dated 23 April 1850. He wrote that the streams "so intermingle air with the lacteal matter as to very quickly oxygenate and cause a separation"; that is his account. He claimed the combination of the external chambers, their plungers and passages with the middle or air chamber, and the air-entering passages d.
**Honest limits.** A food-safe box and printed parts stand in for his wooden box and plungers. FDM prints hold food in their layer lines, so wash well and replace when worn. Your times and weights are the result.
Materiais
12- 1 peçaReferência
- Referência
- 1 peçaReferência
- 1 peçaReferência
- 1 peçaReferência
- 1 peçaReferência
- 1 peçaReferência
- 1 peçaReferência
- Referência
- 1500 mlReferência
- 1 peçaReferência
- 1 peçaReferência
Ferramentas necessárias
11- Referência
- Referência
- 1 vendor sell this, none ship to you yetReferência
- Referência
- 1 vendor sell this, none ship to you yetReferência
- Referência
- Referência
- Referência
- Referência
- Referência
- Referência
Blueprints relacionados
Estes blueprints compartilham conhecimento — técnicas, materiais ou princípios
Double-Dasher Lever Churn: Swing One Lever, One Dasher Rises as the Other Falls
por Woody
Marcenaria
3
0
0
0
0
0
Interraking Plunger Churn: Two Rakes Worked Oppositely by a Double Crank
por Martin
COMIDA E BEBIDAS
0
0
0
0
0
0
Air-Pump Annular Dasher Churn: A Pump in the Middle, a Ring Dasher Round It
por Martin
COMIDA E BEBIDAS
2
0
0
0
0
0
CC0 Domínio Público
Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.
Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.