Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Uncapping Knife: the Bingham Knife (Hasluck, 1905)
Forge

Criado por

Forge

4. novembro 2026NO
13
0
0
1
0

Uncapping Knife: the Bingham Knife (Hasluck, 1905)

The Bingham honey knife: a trowel-like blade of good saw steel, sharpened all round from the underside, riveted to a cranked 3/8 in tang so the handle stands about an inch above the comb. Hasluck warns it is a job only for a maker with the means for that kind of work. Source: P. N. Hasluck, Beehives and Bee Keepers' Appliances (1905), p. 155. Picture: the book's Fig. 152.
Avançado
Unknown

Instruções

1

Shape the blade

Cut a blade of good saw steel 6 or 7 in long and 2 to 3 in wide to the pattern of Fig. 152, like a mason's trowel.

Materiais para este passo:

Fita de aço-molaFita de aço-mola1 6-7 x 2-3 in

Ferramentas necessárias:

TalhadeiraTalhadeira
Lima para metalLima para metal
2

Make the tang

Make a tang of 3/8 in iron or steel: point one end to fit the handle and flatten the other so it can be riveted to the blade.

Materiais para este passo:

Barra redonda de aço macioBarra redonda de aço macio1 3/8 in

Ferramentas necessárias:

ForjaForja
BigornaBigorna
MarteloMartelo
Lima para metalLima para metal
3

Rivet and set the tang

Rivet the flattened end to the blade with two rivets countersunk into the underside of the blade and ground flush. Bend the tang so that with the blade flat on a board the handle stands about 1 in above it.

Materiais para este passo:

Rebites de ferroRebites de ferro2 peças

Ferramentas necessárias:

Berbequim de mãoBerbequim de mão
Conjunto de brocas de escarearConjunto de brocas de escarear
MarteloMartelo
Mó de afiarMó de afiar
4

Handle and edge

Fit the handle on the pointed end of the tang. Sharpen the blade all round like a chisel, from the underside only.

Materiais para este passo:

Material desconhecidoMaterial desconhecido1 handle, material not given

Ferramentas necessárias:

Mó de afiarMó de afiar

Materiais

4

Ferramentas necessárias

8

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...