Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Uninked Ribbon Fabric: Narrow Woven Cotton Strip with Two Selvages (Rogers, US 420,312, 1890)
Charlie

Criado por

Charlie

31. outubro 2026DE
6
0
0
0
0

Uninked Ribbon Fabric: Narrow Woven Cotton Strip with Two Selvages (Rogers, US 420,312, 1890)

Early typewriter ribbons were cut from a roll of fine cotton cloth and the cut edges glued; the edges came out zigzag and the glue spoiled the inking surface. Rogers wove the ribbon to width instead, so it has two true selvages and needs no glue. Result: a narrow cotton ribbon with straight woven edges, ready for inking. Source: Rogers, US 420,312 (1890). He chose cotton over silk: silk cost more, held less ink and sagged in the middle. Not given: width, thread count. Picture drawn by Youblob.
Intermediário
Factory process

Instruções

1

Warp a narrow loom with fine cotton

Set up the loom for a ribbon of typewriter width, not a wide bolt. Rogers used fine cotton; width and thread count: not given. Ours: a power loom (Rogers built his own machinery).

Materiais para este passo:

Linha de algodãoLinha de algodão1 as required

Ferramentas necessárias:

Tear mecânicoTear mecânico
2

Weave the ribbon to width

Weave the strip at its final width so both edges are selvages: straight, unravelling-free, with no cut edge to glue.

Materiais para este passo:

Linha de algodãoLinha de algodão1 as required

Ferramentas necessárias:

Tear mecânicoTear mecânico
3

Wind it off for inking

Take the woven ribbon off the loom; its whole surface is free for ink. Rogers then inks it on one side only.

Ferramentas necessárias:

Tear mecânicoTear mecânico

Materiais

1

Ferramentas necessárias

1

Blueprints relacionados

Estes blueprints compartilham conhecimento — técnicas, materiais ou princípios

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...