Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL

Wash Bottle: a Laboratory Wash Bottle with a Slit Valve (Boy Mechanic, 1915)
A wide-mouthed bottle with a three-tube stopper that squirts a steady stream of water for rinsing glassware and washing precipitates. Blow into one tube to pressurise it; a slit rubber valve holds the pressure, and your thumb on a relief tube starts and stops the jet at once.
Source: The Boy Mechanic, Book 2 (1915), p. 458. Unknown: sizes. Picture: the book's sketch.
Iniciante
Unknown
Instruções
1
1
Bore the stopper
Bore the stopper
Fit a stopper to a large-mouthed bottle and bore three holes through it for the tubes.
Materiais para este passo:
Garrafa de vidro (transparente)1 large mouth
Rolhas de borracha1 peçaFerramentas necessárias:
Furador de rolhas2
2
Make the tubes
Make the tubes
Use brass or glass tubes. Bend the nozzle tube E so it reaches the bottom and points out over the side (sketch); the air tube A and relief tube D only pass through the stopper.
Materiais para este passo:
Tubo de vidro3 peçasFerramentas necessárias:
Maçarico de vidreiro de bancada3
3
Fit the slit valve
Fit the slit valve
On the lower end of air tube A fit a thick piece of rubber tubing B, stoppered at its bottom end, and cut a slit C in its side: blown air opens it, and it closes again to hold the pressure. Push the three tubes through the stopper and fit it in the bottle. To use: fill with water, blow into A, then close D with your thumb; water jets steadily from E and stops the moment the thumb lifts.
Materiais para este passo:
Tubo de borracha1 thick, short pieceFerramentas necessárias:
X-ato (faca de precisão)Materiais
4- 1 large mouthReferência
- 1 peçaReferência
- 3 peçasReferência
- 1 thick, short pieceReferência
Ferramentas necessárias
3- Referência
- Referência
- Referência
Este projeto faz
CC0 Domínio Público
Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.
Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.
