Colaboração
ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL

Wedging Table: Plaster-Topped with a Cutting Wire (Binns, 1910)
The potter's wedging table Binns taught: a strong table with a 30 by 20 in top of two-inch plank, edged to make a trough filled with plaster, and a fine brass wire stretched diagonally from a post on one side for cutting the clay.
Clay is cut on the wire and slapped down on the plaster, fifteen or twenty times, until it is even; wet the plaster if it stiffens the clay too fast.
Source: C. F. Binns, The Potter's Craft (1910), p. 79. Picture: the book's text.
Iniciante
Unknown
Instruções
1
1
Make the top
Make the top
Build a strong table whose top, about 30 by 20 in, is of two-inch plank. Nail a raised edge 2 in high firmly to the sides to form a trough.
Materiais para este passo:
Prancha de madeira1 two-inch plank, about 30 x 20 in
Tábua1 raised edge, 2 in high
Pregos de ferro1 peçaFerramentas necessárias:
Serrote
Martelo2
2
Pour the plaster
Pour the plaster
Fill the trough with plaster and let it harden.
Materiais para este passo:
Gesso de estuque1 peçaFerramentas necessárias:
Martelo3
3
Fit the post and wire
Fit the post and wire
Fasten an upright post in the centre of one side and stretch a fine brass wire from its top to the other side of the table, making a diagonal. The worker stands on the side opposite the post.
Materiais para este passo:
Material desconhecido1 upright post, material not given
Arame fino de latão1 fine brass wire
Pregos de ferro1 peçaFerramentas necessárias:
Martelo
SerroteMateriais
6- 1 two-inch plank, about 30 x 20 inReferência
- 1 raised edge, 2 in highReferência
- 2 peçasReferência
- 1 peçaReferência
- 1 upright post, material not givenReferência
- 1 fine brass wireReferência
Este projeto faz
CC0 Domínio Público
Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.
Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.
