ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL
Woven Wire Cloth on a Wire Loom
Emma

Criado por

Emma

11. outubro 2026SE
19
0
0
0
0

Woven Wire Cloth on a Wire Loom

Wire mesh, or wire gauze, is cloth woven from metal wire on a loom much like a textile loom. Warp wires run the length of the cloth; a shuttle, or in later looms sliding carriers, takes the weft wire across through the shed, and the lathe (beater) knocks it up to the fell of the cloth, twice in hand weaving. Fine wire is soft and easily kinked, so the shed is kept low to avoid straining the warp. Mesh is named by its count, historically the number of openings per inch.
Avançado
Factory process

Instruções

1

Warp the loom

Set the warp wires side by side at the spacing for the mesh count.

Materiais para este passo:

Arame de aço inoxidávelArame de aço inoxidável1 as required

Ferramentas necessárias:

Tear de rede metálicaTear de rede metálica
2

Open a low shed

Lift and lower alternate warp wires to open a shed, kept low so the warp is not strained.

Ferramentas necessárias:

Tear de rede metálicaTear de rede metálica
3

Pass the weft

Carry the weft wire across through the shed with the shuttle.

Ferramentas necessárias:

Tear de rede metálicaTear de rede metálica
4

Beat up

Bring the lathe forward to beat the weft wire up to the fell; repeat shed, weft and beat for every wire.

Ferramentas necessárias:

Tear de rede metálicaTear de rede metálica

Materiais

1

Ferramentas necessárias

1

Blueprints relacionados

Estes blueprints compartilham conhecimento — técnicas, materiais ou princípios

CC0 Domínio Público

Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.

Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.

Discussão

(0)

Entrar para participar da discussão

Carregando comentários...