ARTE
BELEZA E BEM-ESTAR
ARTESANATO
CULTURA E HISTÓRIA
ENTRETENIMENTO
MEIO AMBIENTE
COMIDA E BEBIDAS
ENGENHARIA REVERSA
CIÊNCIAS
ESPORTES
TECNOLOGIA
TECNOLOGIA VESTÍVEL

Writing Paper: Rag Sheets Sized and Hot-Pressed Smooth
A pen needs paper that does not let ink spread: sized, so the ink stays on top, and smooth, so the nib does not catch. Andrew Ure (1839) gives both: hand-made rag sheets dipped in gelatine size, then hot-pressed between smooth pasteboards and heated iron plates, "which communicates a fine smooth surface to writing-paper".
The picture: the drying loft of an 18th-century paper mill, sheets hung on lines (Diderot's Encyclopédie).
Intermediário
About a week with drying
Instruções
1
1
Size the sheets
Size the sheets
Melt hide glue in water with a little alum to a thin, warm size. Spread a few dry, unsized rag sheets in it at a time so each is wetted evenly.
Materiais para este passo:
Papel50 folhas
Cola de pele animal100 g
Alúmen (alúmen de potássio)10 g
Água2 litrosFerramentas necessárias:
Chaleira de ferro
Cuba2
2
Press and dry slowly
Press and dry slowly
Press out the spare size between felts, part the sheets, press again and hang them to dry slowly (Ure allowed three days).
Ferramentas necessárias:
Folha de feltro de lã
Prensa de papel (tipo livro)
Estendal de secagem3
3
Hot-press
Hot-press
Stack the dry sheets, each between two smooth pasteboards, with a heated iron plate in the pile, and press it hard. The heat and pressure give the smooth writing surface.
Ferramentas necessárias:
Cartão colado
Placa de ferro
Placa de aquecimento
Prensa de papel (tipo livro)Materiais
4- 50 folhasReferência
- 100 gReferência
- Referência
- 2 litrosReferência
Ferramentas necessárias
8- Referência
- Referência
- Referência
- Referência
- Referência
- Referência
- Referência
- Referência
Este projeto faz
Blueprints relacionados
Estes blueprints compartilham conhecimento — técnicas, materiais ou princípios
CC0 Domínio Público
Este blueprint é liberado sob CC0. Você é livre para copiar, modificar, distribuir e usar este trabalho para qualquer finalidade, sem pedir permissão.
Apoie o Maker comprando produtos através do Blueprint, onde ele ganha uma Comissão Maker definida pelos vendedores, ou crie uma nova versão deste Blueprint e inclua-o como conexão no seu próprio Blueprint para compartilhar receita.




