
Building a Langspil — The Icelandic Drone Zither
Instructions
Melody and drone from one box
Melody and drone from one box
Cut the soundbox parts
Cut the soundbox parts
Materials for this step:
Baltic Birch Plywood (1/8 inch, 12x12, 10-Pack)1 pieceTools needed:
HacksawGlue the box frame
Glue the box frame
Materials for this step:
PVA Wood Glue1 pieceFit the soundboard
Fit the soundboard
Materials for this step:
Dry Softwood Board1 piece
PVA Wood Glue1 pieceCut a soundhole
Cut a soundhole
Tools needed:
Sloyd Carving KnifeDrill the peg holes
Drill the peg holes
Tools needed:
AwlFit the tuning pegs
Fit the tuning pegs
Materials for this step:
Tuning Pegs3 piecesCarve the nut and bridge
Carve the nut and bridge
Tools needed:
Sloyd Carving KnifeString it
String it
Materials for this step:
Steel Music Wire1 pieceSet the frets
Set the frets
Materials for this step:
Fret Wire1 pieceTools needed:
Metal FileTune the drones
Tune the drones
Tune the melody string
Tune the melody string
Play it
Play it
Compendium — the drone zither
Compendium — the drone zither
Materials
6- Placeholder
- 2 piecesPlaceholder
- 1 piecePlaceholder
- 3 piecesPlaceholder
- 1 piecePlaceholder
Related Blueprints
These blueprints share knowledge with this one — techniques, materials, or principles that connect them in the learning graph.
Related blueprints
Other builds that share materials, tools, or techniques with this one.






CC0 Public Domain
This blueprint is released under CC0. You are free to copy, modify, distribute, and use this work for any purpose, without asking permission.
Support the Maker by purchasing products through their Blueprint where they earn a Maker Commission set by Vendors, or create a new iteration of this Blueprint and include it as a connection in your own Blueprint to share revenue.